KELLERMANN chain riveter KTW2.5 722.00.11

Chain and rivet / KTW2.5

Tool for separating and riveting Hohlnietschlössern

- separate string

- Assembly chain lock

- riveted bolt chain lock

NEW:

- The KTW2.5 chain tool is the increase in development of KTW2.0.

- The tool now includes two pins with different diameters.

- Here, the pre-assembled pick is now even more strongly dimensioned and adapted to 5xx and 6xx strings.

- The closed gazebo is specially designed for the separation of 4xx chains.

The Kellermann Chain Tool allows for easy removal of the old and precise mounting of the new chain (with Rivet) without consuming having to remove the rear swingarm wheel. With branded tool chains (eg. BDID, Regina, RK, etc.) can be separated and riveted to Hohlnietschlössern. For use only a size 19 ring spanner or socket wrench is necessary.

The chain tool consists of the main power transmission tool and a patented positioning for mounting the Nietschlosses, which is characterized by a new and simple Aufschiebemöglichkeit for the side flap of the chain lock. This newly developed magnetic positioning guarantees a simple yet absolutely precise mounting of the side flap of the chain lock.

The available both in print and in counter-plate magnets for holding the two parts of the chain lock and allow through the guide a precise, easy and convenient alignment of the chain lock parts between each other. Yeah.

This is crucial for damage-free mounting of the chain lock, and can pass through the recesses in the pressure plate to be checked at all times. Moreover, the magnets ensure that the positioning of the string sticks and does not need to be constantly taped.

With the main tool, the positioning unit can be used to suspend the side plate of the chain lock; a step that can be very slow and very stressful without the new positioning.

The pressure-plate and counter are designed so that they extend across the adjacent chain links, so that they can be seen with the naked eye during chain lock assembly, when the tab should be pushed away over the two. bolts.

In order for the chain to otherwise frequent blocking of the chain or damage are largely excluded by mounting errors.

It geeiget for all 4, 5 and 6 divisions of the series.

It can be separated chains of major brands and riveted to Hohlnietschlössern.

WARNING !!! !!! ACCESSORIES !!!! The tool is suitable when using the Nietkopfformer for Vollnietschlösser.

Rec. Pair:

4 strands: 10 nM

5er strings: 20nm

6 strands: 25 nm

A torque of more than 35 Nm can damage the tool!