DIVING GLOVES

DIVING GLOVES

If you have ever found yourself in the situation of diving in warm or cold waters, you will know that it can be quite an uncomfortable feeling, especially in the hands. Therefore, it is It is important to avoid heat loss by having a good diving suit and gloves.

Gloves are an important accessory of your diving equipment, as they help improve the tightness of the suit at the level of the wrists and will serve you when you go diving in very cold water. Keep reading this post to learn about its usefulness and the types of diving gloves!

What are diving gloves for?

The DIVING GLOVES are used specifically for protect your hands from any situation that may cause you some kind of inconvenience or problem when you are diving in the sea.

There 2 main reasons why these gloves are responsible for fulfilling that function:

1. They keep your hands warm

The DIVING GLOVES they keep your hands warm.
It only takes a small drop in body temperature for you to run the risk of hypothermia, which is why divers also equip themselves with wetsuits prepared for low temperatures.

2. They act as a barrier against any hard and sharp element

When you are submerged in the water, you will have the possibility of encountering hard areas such as rocks or corals. The use of gloves will help protect hands from abrasions, cuts or punctures.

Types of diving gloves

There are various types and models of DIVING GLOVES. However, we will refer to the most demanded by consumers:

- Five-finger glove

It is usually the most popular design because allows ample freedom of movement of the hands.

- 3-finger glove

It is a variant of the mittens. They are not commonly used but can be a good option when constant handling of the equipment is not required and the immersion is done in cold waters.

The closure of the gloves can change depending on the model as there is a wide variety of neoprene gloves; there are with velcro closure, and those with elastic material in the wrist area, the latter are a little longer.

Key points to choose your diving gloves

Below, we highlight some factors that you must take into account if you want to choose your diving gloves appropriately:

1. think about the type of immersion what will you do with them
two. The glove thickness is proportional to the thermal insulation they will provide you. The colder the water, the thicker you will need.
3. The freedom of movement is inversely proportional to thickness. The less thickness, the more movement but less thermal protection.
Four. Avoid gloves with excessively large zippers and velcro closures.
5. Choose the material depending on whether you will practice the diving in warm or cold waters.
6. Find a model with reinforcements on the palms and fingers.
7. For added comfort and manageability, choose a gloves that are elastic.

How to choose the correct size of gloves?

When choosing these gloves it is essential to consider various components for example, material, thickness, freedom of movement, closures, style and the right size, among others.

One trick though to find out what size gloves you should use is guiding you with two essential measures:

- The outline of the palm (A).
- The distance from the tip of the middle finger, to where the wrist begins (B).

However, if you need more information about which size to choose, you can refer to the measurements in the following table:

Do not forget that they must fit well to avoid, as much as possible, the entrance of water inside the glove.

Also, you want to make sure that the spaces between the fingers touch your hand. If not, you are wearing very small gloves.. Instead, If when you close your fist you notice that a bag forms in the palm of your hand, it means that they are very large.

Recommendations for the maintenance of diving gloves

In order for the gloves to last as long as possible in optimal conditions, it is recommended to follow the following instructions:

1. Always rinse with fresh water and clean after every dive

This is essential to eliminate salt, the main enemy of the materials from which the gloves are made.

two. Hand wash with neutral soap

You should not put them, under any circumstances, in the washing machine, much less wash them with detergents. It should always be done by hand and with a neutral soap.

3. Avoid sun exposure

To dry them you must place them in a cool and current place. Completely avoid letting them dry in the sun as the result will be an early deterioration of the gloves.

Four. avoid humidity

When you finish cleaning them, you should make sure to place them somewhere where the air reaches them, but never store them wet, as they can be damaged and give off an unpleasant smell.

Buy diving gloves

At Scubatic we have an extensive and wide variety of diving, apnea or spearfishing gloves with thicknesses ranging from 1.5 mm to 6.5 mm from the best brands, quality and at the cheapest price on the market. Get to know our wide variety of diving gloves and get the one that best suits your needs, tastes, but above all your pocket.