Cylinders and valves
Diving tanks
The diving bottles they store air or any other mixture of gases that allow you to breathe underwater without any problem.
Each of these bottles has a typical capacity marked in liters as a whole of a maximum working pressure reflected in atmospheres, and both its manufacture and its use comply with a series of strict safety regulations.
Types of diving cylinders
When you go to buy a diving bottle you must take into account the material with which it has been manufactured. Mainly There are two types:
- Steel scuba tanks
Their base is convex, so they need a rubber band to hold on to. In addition, it serves as protection and they stand out for their surprising mechanical resistance and for the low tendency to buoyancy when the bottle is empty.
Its biggest defect is poor resistance to corrosion; if the water enters inside or if the oil and water separator of the compressor does not work, corrosion can immediately reduce the thickness of the steel wall.
- Aluminum scuba bottles
They have the virtue of being lighter and not rusting. In salt water, they have the possibility of being attacked by electrolysis. Nevertheless, are primarily used for tropical climates.
Because compressors cannot completely remove moisture from the air, they are often position in the first and only tanks that most tropical dive centers have.
Scuba tank storage capacity
The sizes of scuba bottles can be very varied and, although they usually have standard measurements, many depend on the material with which they were made. Nevertheless, the smallest usually have only 6 liters, while the largest have the possibility of covering up to 18 liters.
One of the most used measures contains especially the 12 liters, but, in general, they have the possibility of getting to store from 2,000 to 3,600 liters of wind at atmospheric pressure.
What are scuba bottles used for?
The diving bottles are used to store atmospheric air at a pressure of 200 or 300 bar, making it the oxygen dispenser you need once you''re underwater. Without it, you will not get very far in the world of diving.
In the upper part, the bottles have a particular tap whose purpose is to distribute the oxygen. A pressure regulator coupling is added to this tap so that the minimum possible loss of air occurs.
Surely, at first, it will seem like little oxygen until you regulate your breathing underwater. In this aspect, we recommend that you always consider that diving is a sport and that you are doing physical exercise. In addition, high pressure leads you to consume a greater amount of oxygen.
Refillable scuba tanks
The diving bottles They are usually rechargeable, you just have to go to a certified center for this type of activity and make sure that the bottle complies with current regulations for compressed air containers before proceeding to recharge.
you shall have the hydrostatic test certificate and visual inspection according to the recent requirements of your territory. In the case of larger ones, it is an administrative procedure because they are recharged in authorized centers.
The costs of the recharge vary depending on the size and the center to which you take it, existing air refills at 200 bar for 8-litre cylinders for 8 euros, rising to 13 euros for those up to 18 litres..
Deals on scuba oxygen cylinders
Find an extensive variety of products in diving bottles and discover the best offers so that your diving equipment is unforgettable at Scubatec. You can choose between 3, 5, 7, 10, 12 and 15 liter steel bottles with a working pressure of 200, 232 or 300 bar.
Also, You will have aluminum diving cylinders of 1, 2, 3, 5.55, 7, 10 and 11.1 liters with a working pressure of 200 to 230 bar. Remember that on the surface the steel ones are usually lighter and in the water the aluminum ones provide neutral buoyancy.
Buy diving bottles
in scubatic We have a wide variety of models, colors, sizes, storage and long-lasting diving bottles., which you can obtain instantly, easily and at the best price online.
FOR buy scuba bottles that meet all the needs and functionality that scuba diving requires, you should not only take into account the price, but also the specifications and functionality of the diving bottle to enjoy the deep sea without putting your integrity and safety at risk.
Do you need to buy bottles to dive and you don''t know which one to decide on? Scubatic advises you.

replacement anti-extrusion ring for diving cylinder valve bk2031

fixed bi-bottle strap belt tank fastening band w/antislip

replacement handwheel for diving cylinder valve 1999

protective net for bottle nitrox 10lts

kit de tóricas de recambio para grifería/botella

replacement handwheel screw for scuba tank valve handwheel screw

arandela de teflón de pomo de recambio para grifería/botella

small replacement dip tube for diving cylinder valve

fixed bi-bottle strap belt tank fastening band w antislip bibo

protective mesh for scuba tank compatible with mixed fuel. nitrox 12lts

protective mesh for diving cylinder

tuerca de eje de pomo con tórica de recambio para grifería/botella

tuerca de bloqueo de pomo de recambio para grifería/botella

replacement copper washer for scuba tank valve copper washer

replacement handwheel spring for diving cylinder valve handwheel spring

net for 15lt diving bottle


complete replacement valve for diving cylinder 1/4

protective mesh for diving cylinder

kit completo de pomo de recambio para grifería/botella

muelle de pomo de recambio para grifería/botella

tuerca de eje de pomo de recambio para grifería/botella

band support metal holder twintank - xr line

replacement grip nut for diving cylinder valve handgrip nut

diving tank net 12l


eje de reserva de recambio para grifería/botella

protective mesh for diving cylinder

válvula de teflón de recambio para grifería/botella

replacement nylon anti-friction washer for diving cylinder valve antifriction washer

rubber strap for bottle diving - xr line

replacement valve stem for diving cylinder valve valve stem

adaptador de recambio para grifería con tóricas din/int

replacement side plug for scuba tank valve m22x1,25

diving bottle protection net 10-12l

replacement valve spindle for diving cylinder valve valve shaft

eje de recambio para grifería/botella

tórica de regulador-grifería de recambio para grifería/botella

replacement grip spring for diving cylinder valve handgrip spring

net for 10lt diving bottle


replacement o-ring for diving cylinder valve an 19

tank information transmitter

complete replacement seat holder for diving cylinder valve pasticca

red diving bottle protection tank net lt.12

teflón seal washer


o-ring seal 4100 sh

culote monobotella de recambio para grifería/botella 12-15-18l

valve modular dual connection valve

tórica de cuerpo de eje de recambio para grifería/botella

red diving bottle protection tank net lt.18

asa de transporte de botella de recambio para grifería/botella

teflón seal washer

culote monobotella de recambio para grifería/botella 5l

valve modular single connection valve

tórica de eje de recambio para grifería/botella

replacement o-ring for diving cylinder valve 116

red bottle diving tank net lt.7

replacement maintenance kit for diving single-cylinder valve manutenzione bombola

red diving bottle protection tank net lt.15

tórica de asiento plano-casco de recambio para grifería/botella

indicador de pomo de recambio para grifería/botella

replacement o-ring for diving cylinder valve 105

din / int adapter din/int adaptor

replacement o-ring for diving cylinder valve 3050 90 sh

tubo pescante de asiento plano de recambio para grifería/botella

tórica de asiento cónico-casco de recambio para grifería/botella

protective net for bottle nitrox 18lts

replacement metal nozzle for scuba tank valve metalspout

adapter / int /int connecter

replacement o-ring for diving cylinder valve m 0110-25

red bottle diving tank net lt.10

eje de pomo con tórica y arandela de teflón de recambio para grifería/botella

protective net for bottle nitrox 15lts

replacement handwheel for scuba tank valve handwheel

replacement valve lock nut for scuba tank valve

arandela de teflón de eje de recambio para grifería/botella