MARES Tank information transmitter 414319

The "Mares Led Tank Module" probe allows the pressure value detected in the tanks to be transmitted directly to the Mares integrated dive computers. Through a color code it is possible to have an immediate estimate of the level of gas present in a tank.

Once the first stage is mounted on one of the two high pressure outlets (7/16""), it can be associated with your computer in no time.

Through a color code of the LED it can be used as a pressure gauge even on the surface. The probe has a flashing LED that indicates the gas pressure by means of color codes: green for more than 180 bar, yellow for 100 bar and red below 50 bar.

Through the use of "Module Tank LED Mares Sonda HP Wireless, its integrated dive computer, once the volumes of the tanks have been configured, is able to provide you with the real consumption in liters and thus optimize bottom times based on the reserve of decompressive gas.

To avoid excessive battery consumption, if there are no variations greater than 1 bar for more than 4 minutes, the flashing is deactivated.

The battery is a CR123A and allows between 150 and 200 dives taking into account the temperate temperatures of use.

The main characteristics of the "Mares Led Tank Module" pressure probe are:

• Transmits information about the tank

• Colored LEDs for a quick check of the tank on the surface

• Colored LEDs to signal low air conditions to your buddy during the dive

• Memorization of the computer/probe combination

• EN250 certificate: 2014 at 300 bar

• Battery type: cr123a, user replaceable