Plug SZ-B 18/150

The ETA approved SZ anchor, Option 1, is a high performance pressure anchor system with a triple expansion

special sleeve, which allows very high permissible loads with reduced axial and edge distances.

The plastic compression ring ensures the permanent hold of the fixing piece against the substrate and prevents the anchoring

and prevents the anchor from rotating during installation.

Advantages

- Very high tensile and shear loads

Application Examples

Medium and heavy anchors in cracked and uncracked concrete,

For example, steel supports, railings, machines, scaffolding, supports.

Drill diameter mm: 12

Total length of the spike in mm: 260

Thread: M12

Drill hole depth mm: 245

Required anchorage depth in concrete mm:

Plug tightening torque Nm: 80

Ø mm / clamping thickness: 18 / 150 mm

Packing unit: 1