MARES Dive computer SMART AIR 414138BKSI

The Smart Air dive computer is innovative and complete. Its characteristics make it suitable to meet the needs of all divers, from expert technical divers to recreational divers and freedivers.
Up to three transmitters can be used for multigas diving and transmission of tank pressure data is via radio frequency. Each transmitter has a flashing LED that indicates the gas pressure by means of color codes: green for more than 180 bar, yellow for 100 bar and red below 50 bar.
The display shows data divided into three independent lines, with large numbers immediately readable thanks to very sharp and clear segments. The most important data, such as Deco/No Deco, depth and pressure, are displayed with larger digits.
The information in the upper and lower areas can be chosen by the user.

The Smart Air Logbook can store information for 95 hours of diving! Once downloaded to your PC or Mac, you can view profiles for each dive at a five-second sample rate. You can also download this information to your Smart device using the Bluelink interface through the MySSI app.

The "Dive-planner" function allows you to plan your dives, with or without decompression, and offers the possibility to set a surface interval for repetitive dives. There is a "Bottom Time" function for those who want to know only the time and depth of the dive, with resettable average depth and stopwatch.

If you are a freediving enthusiast, Smart Air offers you an "Apnea" function that shows you all the information, with dedicated visual and acoustic alarms. Lastly, Smart Air uses a lithium battery, which is long lasting, readily available and inexpensive.

The main features of the Smart Air dive computer are:
• Software: RGBM Mares-Wienke with 10 fabrics
• Selectable gas number : 3
• Pressure probe: yes, up to 3 optional
• Nitrox: yes , 21-99% O2
• Modes: Scuba, Gauge, Apnea, Clock
• Maximum operating depth: 150 m
• Altitude compensation: manual
• Alarms: Audio / Video selectable
• Interface: optional
• Memory: 95 hours with sampling every 5"
• Display: backlit segment LCD
• Battery: User replaceable CR2450, 100-150 dives

BATTERY TYPE
CR2450
Battery life
200-300 hours of immersion over a three-year period
Nitrox use
EAN from 21% to 99%
depth max. visualized
150 m / 492 ft
Ascent rate
Yes
memory capacity
95 hr
Profile sampling rate
5 s
Screen
SEGMENT DISPLAY
GAS CHANGE
Yes
Chronometer
Yes
WATCH
Yes
Dual time
Yes
Daily alarm
Yes
Planning mode
Yes
Select Metric / Imperial units
Yes
Salt water or fresh water settings
Yes
Residual nitrogen reset
Yes
Option to disable audible alarms
Yes
Exclusion of "uncontrolled ascent"
Yes
Altitude settings
Yes
Temperature
Measurement range: -10°C to +50°C / 14°F to 122°F
Dive log memory
95 hours of dive profile at 5-second sampling rate
Material display
Mineral glass
WATCH
Quartz clock, time, date, dive time display up to 999 minutes
Software update
Yes
Integrated air consumption
Yes
Resistant glass
Yes
USB charger
NOT

MINERAL GLASS DISPLAY
(Tempered) Superior scratch resistance and improved readability in all diving conditions and viewing angles.
SOFTWARE UPGRADEABILITY
Keep the computer up to date with the latest Mares developments.
GAS SWITCHING
Set the computer to include one or more high oxygen concentration gases in addition to your main gas and benefit from shorter decompression schedules by switching gases during the dive. Depending on the model, two or even three gases can be specified with oxygen content ranging from 21 to 99%.
SEGMENT DISPLAY
Needle-sharp information combined and intelligent placement of information for easiest readability.