An automatic chain lubrication system controlled by negative pressure.
Chain life increases up to 7 times.
The chain is virtually maintenance-free and maintenance effort is greatly reduced.
The v-System is easy to install and can fit almost any model.
The optimized system proves its effectiveness in both summer and winter.
The dispensing unit can be reliably screwed or glued under the swing arm with the omega bracket.
The standard tank lasts more than 1,000 km, depending on the setting.
How does the Scottoiler work?
The Scottoiler v system is vacuum controlled. When the engine is running, a vacuum is created.
This raises a diaphragm, which in turn opens the valve.
While the valve is open, oil flows by gravity through the supply hose to the chain,
through the rear sprocket. The amount of oil is regulated by adjusting the valve. It's not a bomb.
- the needle valve and valve seat are now manufactured with even greater precision, ensuring even better dosing
- the profile of the needle valve has been modified, allowing a more uniform change of dosage
- the supply hose has been changed, which makes ventilation much easier.
- the RMV is designed in a modern smoke gray
- the protective covers of the supply hose and the aeration hose are now black and therefore less sensitive
- a practical refill bottle with 250 ml content is included
- Illustrated instructions for easy installation
- assembly instructions by model to download
The kit consists of a tank with valve (RMV) and an injector that dispenses oil onto the chain and sprocket.
Also included is a 250 ml bottle of green biodegradable Scottoil for the entire temperature range of 0 to 40 °C, enough for a distance of up to 10,000 km.
Various components are also included that allow the kit to be assembled in different ways.
- Extends chain life by up to 7 times functional life
- For all types of motorcycles, including fuel injectors