Dacia steering wheel remote control adapter for various vehicles, 12 pin/24 pin/6 pin
Retain the original functions of the steering wheel remote control when replacing the factory radio with an aftermarket radio. Depending on the vehicle's equipment and the range of functions and software of the retrofit device, some operating functions may be omitted or replaced by others. Compare the adapter plugs shown with those in your vehicle and make sure they match visually and technically. Also check if one of the specified original factory radios was installed in your vehicle. Before final installation, check that the vehicle functions, vehicle settings, and steering wheel remote control are working properly.
Note:
analogical Connection: Dacia 12-pin / 24-pin / 6-pin connector Adapt the factory grey plug coding/routing using workshop tools > if necessary 2018 Vehicles > Red +12V Ignition Current Terminal 15 Fuse Box Fuse > If necessary 2018 Vehicles > Red interface +12V ignition current terminal 15 fuse box with fuses > if necessary
The following signals are provided: Remote control on the steering wheel *Vehicles 2017> with Visteon RO13-X07 OEM device without CAN bus > Item: 42srn011 **Vehicles with radio preparation
Connection cable for the following radio manufacturers: