MOTUL Motorcycle transmission gear mineral oil 85W140 150 ML SCOOTER 714.05.73

Motul brand oil is considered one of the best on the market as it is of the highest quality, thus generating less friction and reducing the chances of residues damaging internal parts and bearings.
Before buying any Motul oil, first find out which of them is the best for you to use, since it is not the same to drive on the road than on competition terrain, for example. We solve your doubts!

Motul Scooter Gear 85W-140

Specially developed for final drives of scooters and mopeds that are exposed to high loads. The adapted packaging in the practical tube facilitates the application. Especially recommended for final drives of SYM scooters, MOTO GUZZI final drives, but also for all other gearboxes that require an oil of SAE 85W-140 viscosity class.

STANDARDS: API GL-4 / GL-5

- Very high lubrication capacity to withstand frequent successive load changes, for example, stops at full speed in urban traffic, with little wear.

- 140 warm viscosity provides excellent oil film strength at high temperatures and reduces gear noise.

- Very stable and resistant oil film in various driving conditions, at idle, under strong acceleration and at full power.

- EP and anti-wear additives protect against wear and increase gearbox life at very high speeds (downshifting) and under shock loads while driving (rear wheel lockup).

- Excellent protection against corrosion, against ageing, prevents the formation of foam.

Oil change: It must be adjusted according to the manufacturer's requirements and according to your own use.

SAE J 306 85W-140 Viscosity

Density at 20°C ASTM D1298 0.904

Viscosity at 40°C ASTM D445 355.0 mm²/s

Viscosity at 100°C ASTM D445 25.0 mm²/s

Viscosity Index ASTM D2270 100.0

Pour Point ASTM D97 -19.0 °C / -2.0 °F

Flash Point ASTM D92 208.0 °C / 406.0 °F
APPLICATION: GEAR
VISCOSITY: 85W140
QUALITY: MINERAL
API SPECIFICATION: GL4
CONTENT: 0.175 LITERS