MOTUL Synthetic motor oil for motorcycle 10W50 4T 1L HC- 5100 714.00.86

Motul brand oil is considered one of the best on the market as it is of the highest quality, thus generating less friction and reducing the chances of residues damaging internal parts and bearings.
Before buying any Motul oil, first find out which of them is the best for you to use, since it is not the same to drive on the road than on competition terrain, for example. We solve your doubts!

Motul 5100 4T 10W-50



MOTUL 5100 4T 10W50 is a 4-stroke multigrade oil for demanding motorcycle engines based on MOTUL Technosynthesis? with high-quality ester components and special additives for gear lubrication. Exceeds the requirements of motorcycle manufacturers who prescribe SAE 10W-50 viscosity for certain models. For high performance motorcycles, sports motorcycles, street motorcycles, trail motorcycles, off-road motorcycles, enduros, trials, quads, scooters, etc. with 4-stroke engines with or without integrated gearbox, wet or dry clutch. Also for engines that meet Euro-2 or Euro-3 requirements.



SPECIFICATIONS/STANDARDS:

STANDARDS: API SM/SL/SJ/SH/SG

Damage Charge Level FZG = 14FLS

RELAYS: JASO MA2 N° M033MOT113



The JASO (Japan Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils with JASO T 903. The MA, MA1 and MA2 gradations make it easy to select the motorcycle engine oils to be used. have been specially developed for wet clutches. JASO MA2 stands for the highest friction values and therefore optimum clutch compatibility when changing gears, during the acceleration phase and also at consistently high speeds.



Advantage:

- Ester components, in combination with the additive package, improve shear strength, wear protection, and engine and transmission life. This is documented by the excellent FZG test result (Forschungsstelle für Zahnräder und Getriebebau) of the damage load stage =14 FLS (Failure Load Stage). The lower the value, eg 1 FLS, the lower the protection against wear; the higher the value, eg 14 FLS, the better the gearbox wear protection. This test can be used to determine if adequate lubricating film thickness between gears ensures reliable gearbox operation.

- The optimized content of sulfur and phosphorus guarantees the long-term operation of the catalysts.

- Prevents corrosion and contamination in the engine.

- For modern engine technology with wet clutch and gearbox lubrication in the same oil bath. The clutch does not bind or slip.

- The mild viscosity allows rapid lubrication even in the starting phase, reduces critical wear at cold start and is excellently suited for hydraulic tappets.



RECOMMENDATIONS AND NOTES:

Change the interval according to the vehicle manufacturer's specifications or adjusted according to the operating conditions. Before use, be sure to observe the manufacturer's service documents and recommendations.



Properties:

Color (visual) brown

Viscosity SAE J 300 10W-50

Density at 20°C ASTM D 1298 0.873

Viscosity at 100°C ASTM D 445 17.73 mm²/s

Viscosity at 40°C ASTM D 445 118.3 mm²/s

Viscosity index ASTM D 2270 168

Pour point ASTM D 97 -39°C

Flash point ASTM D 92 218°C

TBN ASTM D 2896 8.2 mg KOH/g
APPLICATION: ENGINE
VISCOSITY: 10W50
TYPE: 4-STROKE
QUALITY: SYNTHETIC
JASO APPROVALS: MA2
API SPECIFICATION: SG
CONTENT: 1 LITERS