Yuasa NP batteries have excellent deep discharge recovery properties in connection with long life in float charge operation and are therefore suitable for numerous applications in float and cyclic charge operation.
The electrolyte is wrapped in a fleece and is also approved for aircraft (IATA).
We recommend the JMP 4000 charger for charging and maintenance.
Technical specifications:
Capacity 20 hours in AH = 7.0
Dimensions in mm 151x65x97.5
Weight approx. 3.0kg
Features:
Totally maintenance free
locked cells
Safe from deep discharges
no electrolyte leakage
complete recombination of oxygen
suitable for continuous charging or cyclical operation
can be used in any position
higher energy density
Long useful life
Tested by you.
Charging in cycle mode:
The charging voltage should be between 2.35 and 2.5V/cell.
The maximum charging current must be limited to 0.25 C (A) in cyclic operation.
The charging time should not exceed 24 hours.
Float Mode Charge:
The charging voltage should be between 2.25 and 2.3 V/cell.
The maximum charging current does not have to be limited when operating in float mode.
The battery can be considered charged when the residual charging current has reached 0.002 C (A).
Application areas:
Alarm systems, cable television, communication equipment, portable telephones, control devices, computers
electronic cash registers, electronic test equipment, emergency lighting systems, fire alarm and security system
Geophysical devices, marine devices, medical devices, microprocessor-based office machines
portable video and film lighting, power tools, handheld vacuums, telecommunication systems, etc. VOLTAGE: 12V CAPACITY: 7.0 AH (10H) VERSION: MAINTENANCE FREE ON: YES LENGTH: 151MM WIDTH: 65MM HEIGHT: 97.5MM READY WEIGHT: 3.0KG ACID PACK INCLUDED: NO CONNECTION TYPE: FEMALE FLAT TERMINAL GAS DRAIN: WITHOUT