VALVOLINE Coolant with Antifreeze for Vehicles 20L KONZ ALTN 5300031 ™ OEM ADV AFC 48 5300089

Valvoline™ OEM Advanced 48

OEM-approved premium class antifreeze/coolant based on hybrid technology for passenger cars, trucks, buses and off-road applications.
Valvoline OEM Advanced 48 is a premium antifreeze/coolant for passenger cars, light commercial vehicles and heavy-duty applications.
Its ethylene glycol-based formulation is designed for all types of engines.
It is a phosphate-free technology-based coolant with a low silicate content and a low pH value that protects all metals in the cooling system, including aluminum, against corrosion.
When diluted 50% with distilled water, Valvoline OEM Advanced 48 protects modern engine parts against freezing in winter and overheating in summer.
The following table contains the mixing instructions.

Premium formulation for superior long-term protection:

up to 5 years / 250,000 km for passenger cars
up to 3 years / 500,000 km for commercial vehicles
Valvoline OEM Advanced 48 is a premium coolant based on hybrid technology that offers exceptional protection for important engine parts.
Protects the engine block cooling channels, cylinder heads (pitting in the liners), radiator and water pump against corrosion, overheating and freezing.
It contains a high-quality antifoaming agent and does not attack gaskets, hoses, plastic parts or vehicle paint.

OEM approvals/homologations:

BMW LC-87
Deutz DQC CA-14
MAN 324 Type NF
MB 325.0 Homologation
MB 326.0 Approval
MTU 5048

Performance levels / recommendations:

Detroit Diesel 7SE298
TL 774-C: VW / Audi / Seat / Skoda
Federal Specification A-A-870A
Jaguar
Jenbacher TA-Nº 1000-0201
Liebherr Minimum LH-00-COL3A
MAN Diesel & Turbo List 3.3.7
Maybach/Smart MB 325.0/326.0 (until 2014)
MB Turismos (until April 2014)
MB Trucks (until September 2011)
Opel/Vauxhall (up to 2000) B 040 0240
Porsche (until 1995)
Rolls-Royce (since 1998)
Saab 690 1599
Tesla (since 2013)
TMC of ATA RP-302B
GO HOOL
Volvo 2015 (passenger cars) and earlier
Volvo Truck (until 2005)
ZASTAVA
ASTM D3306 / D4985
GM1899M / 1825M
SAE J814 / J1034 / J1941

Container: drum with integrated drain tap
CONTENT: 20 LITERS
DESCRIPTION: AFC 48
READY-MIX: NO
MANUFACTURER APPROVALS: BMW LC-87, DEUTZ DQC CA-14, MAN 324 TYP NF, MB-325.0, MB-326.0, MTU 5048
MANUFACTURER RECOMMENDATION: ASTM D3306, ASTM D4985, AUDI TL 774-C, DETROIT DIESEL 7SE298, FEDERAL SPECIFICATION A-A-870A, GM1825M, GM1899M, JAGUAR, JENBACHER TA-NR. 1000-0201, LIEBHERR MINIMUM LH-00-COL3A, MAN DIESEL & TURBO LISTE 3.3.7, MB 325.0, MB 326.0, OPEL B 040 0240, PORSCHE (BIS 1995), ROLLS-ROYCE (AB 1998), SAAB 690 1599, SAE J1034, SAE J1941, SAE J814, SEAT TL 774-C, SKODA TL 774-C, TESLA (AB 2013), TMC VON ATA RP-302B, VAN HOOL, VOLVO 2015 (PKW) UND ÄLTER, VOLVO TRUCK (BIS 2005), VW TL 774-C, ZASTAVA