TRAX ADV aluminum case
WINNER OF THE COMPARISON TEST in MOTORRAD magazine number 05/2020. Test result: VERY GOOD
A range of suitcases for traveling without having to give up anything: in the development of the TRAX ADV, stability and water and dust tightness were as important factors as creating a suitcase that was easy to handle. Convenient carrying handles, a fully removable lid, fiberglass reinforced plastic corners and beveled edges for optimal ground clearance when cornering are just a few of its clever features. static. Our motorcyclists with experience on routes have developed a Premium aluminum suitcase ideal for all types of challenges.
Water and dust will no longer be a problem
The robust TRAX ADV aluminum cases are 100% water and dust tight thanks to robotic welding, rivets and replaceable joints. And so All suitcases must demonstrate this in the verification procedure to which we subject them. Thanks to the relief on the outside, the TRAX ADV aluminum suitcases are made with a thickness of 1.5 mm, offering stability and an unmistakable aesthetic.
A suitcase with extra protection
The notches act as additional reinforcement of the deep-drawn lid. The unilateral opening or the possibility of removing it completely make it very easy to fill. Thanks to its stable aluminum handles, the suitcase is easy to transport and mount in the vehicle. In addition, the wide grip points integrated into the lid give the luggage a secure hold.
Thought down to the smallest detail
Small details with big effect: The premium aluminum suitcase can be easily opened thanks to a membrane even after being exposed to strong fluctuations in pressure and temperature. The wide range of accessories completes this attractive offer: the set of simultaneous locking padlocks, additional bags and solutions for the interior, the holder for bottles or jerry cans and the lightweight camping table offer everything you need.
A rugged companion for any adventure
Whether for long or short distance tours, TRAX ADV suitcases are ideal for small and large adventures. With just two maneuvers, these are fixed to the PRO and EVO side supports and a padlock provides additional security. We also have the corresponding adapter kits to fix them on the side supports of other manufacturers.
- Resistant and waterproof aluminum suitcase
- Beveled side edges for high ground clearance when cornering, extra protection thanks to fiberglass reinforced plastic corners
- Robotic welding and rivets keep moisture out
- Completely removable lid with quick closure, also when it is in use. full
- 4 large lashing points integrated into the lid design (for example for the tent bag or an additional bag)
- High stability thanks to printed design, welded edges and pre-installed support rail
- Stainless steel hinges and anodized aluminum carry handles
- Opening limiters offer additional stability when using additional luggage on the lid
- replaceable lid gasket
- The integrated membrane allows the lid to be opened easily even in the event of sudden changes in pressure and temperature.
- Quick mounting on all PRO and EVO side carriers (adapter available separately)
- Adapter kits for mounting on brackets from other manufacturers, such as Givi and Hepco & Becker, also available
- Padlock set with 6 simultaneously closing padlocks available as an option and not included in the scope of delivery
- Wide range of accessories available
PRO side bag holder
- Extreme resistance thanks to its optimized shape and hard 2.5 mm steel
- Perfect fit, designed for a close fit to the vehicle
- Completely removable with the new quick releases, even more resistant
- Anti-theft system available as an option
- To fix it permanently, the quick release can be replaced by approved parts (M8)
- Numerous functional perforations compatible, among others, with the RotopaX system
- Easy mounting on the original fixing points
- Effective protection against corrosion by powder coating
- Secure attachment for TRAX, AERO and NANUK side cases as well as SysBag 15 and SysBag 30 with adapter plate
- Adapter kits also available for attaching Givi/Kappa, Krauser and Shad brand panniers
- MATERIAL: STEEL
- Surface: Powder Coated
- Color: BLACK
- overall weight: AC. 4.9kg
- The adapter kit, available separately, is required for aluminum cases from SW-MOTECH and other manufacturers, for AERO ABS side cases, as well as for aluminum cases from SW-MOTECH and other manufacturers. as for SysBags (SysBag 15, 30, WP L) with adapter plate.
Adapter kit for PRO side carriers
- Adapter kit for attaching TRAX or NANUK side cases to the SW-MOTECH PRO side carrier
- It is mounted in the available holes of the SW-MOTECH PRO side carrier
- For the right and left sides
- Color: SILVER
- overall weight: AC. 0.3kg
TRAX ADV L aluminum case
- Model for the left side of the motorcycle
- Protection against oxidation and abrasion by anodizing
- Resistant and waterproof aluminum suitcase
- Beveled side edges for high ground clearance when cornering, extra protection thanks to fiberglass reinforced plastic corners
- Robotic welding and rivets keep moisture out
- Completely removable lid with quick closure, also when it is in use. full
- 4 large lashing points integrated into the lid design (for example for the tent bag or an additional bag)
- High stability thanks to printed design, welded edges and pre-installed support rail
- Stainless steel hinges and anodized aluminum carry handles
- Opening limiters offer additional stability when using additional luggage on the lid
- replaceable lid gasket
- The integrated membrane allows the lid to be opened easily even in the event of sudden changes in pressure and temperature.
- Quick mounting on all PRO and EVO side carriers (adapter available separately)
- Adapter kits for mounting on brackets from other manufacturers, such as Givi and Hepco & Becker, also available
- Padlock set with 6 simultaneously closing padlocks available as an option and not included in the scope of delivery
- MATERIAL: ALUMINUM
- material thickness: 0.15cm
- Surface: ANODIZED
- Color: SILVER
- Dimensions: 49.0 x 28.0 x 37.0cm
- overall weight: AC. 5.4kg
- Total volume: 45.0l
- Also available as a TRAX ADV case system with two side cases, model-specific side carriers, adapters and lock set.
- Side carrier, adapter kit, TRAX lock set
TRAX ADV M aluminum case
- Model for the right side of the motorcycle
- Protection against oxidation and abrasion by anodizing
- Resistant and waterproof aluminum suitcase
- Beveled side edges for high ground clearance when cornering, extra protection thanks to fiberglass reinforced plastic corners
- Robotic welding and rivets keep moisture out
- Completely removable lid with quick closure, also when it is in use. full
- 4 large lashing points integrated into the lid design (for example for the tent bag or an additional bag)
- High stability thanks to printed design, welded edges and pre-installed support rail
- Stainless steel hinges and anodized aluminum carry handles
- Opening limiters offer additional stability when using additional luggage on the lid
- replaceable lid gasket
- The integrated membrane allows the lid to be opened easily even in the event of sudden changes in pressure and temperature.
- Quick mounting on all PRO and EVO side carriers (adapter available separately)
- Adapter kits for mounting on brackets from other manufacturers, such as Givi and Hepco & Becker, also available
- Padlock set with 6 simultaneously closing padlocks available as an option and not included in the scope of delivery
- MATERIAL: ALUMINUM
- Surface: ANODIZED
- Color: SILVER
- Dimensions: 49.0 x 23.0 x 37.0cm
- overall weight: AC. 5.1kg
- Total volume: 37.0l
- Also available as a TRAX ADV case system with two side cases, model-specific side carriers, adapters and lock set.
- Side carrier, adapter kit, TRAX lock set
TRAX cylinder set with PRO anti-theft system
- 9 locks closing simultaneously
- With anti-theft system for PRO side carrier
- Compatible with side cases and top cases of the TRAX ADV and TRAX ION series
- One key for all locks
- Color: BLACK
- overall weight: AC. 0.5kg
multitool keychain
- The multitool, a practical key ring
- Quick release opening for EVO and PRO side carrier
- Hex key (14 mm), ideal for many motorcycle mirrors
- Hex key in four additional sizes (8, 10, 12, 13 mm)
- Bottle opener
- key ring hole
- With laser-engraved SW-MOTECH logo
- MATERIAL: STAINLESS STEEL
- Surface: brushed
- Color: SILVER
- overall weight: AC. 0.0kg
delivery content
- 1 x TRAX ADV L aluminum case, 45.00 l, left, silver
- 1 x TRAX ADV M aluminum case, 37.00 l, right, silver
- 2 x PRO side bag holder
- 2 x Adapter kit for PRO side carriers
- 1 x TRAX cylinder lock set with PRO anti-theft system
- 1 x Multitool Keychain
- 4 x Opening limiter
- 2 x Storage Bag
- Assembly instructions
- mounting hardware
DETAILS
- Color: SILVER
- overall weight: AC. 20.4kg
- Total volume: 82.0l
Note
- Also available as a TRAX ADV case system with two side cases, model-specific side carriers, adapters and lock set.
According to the data provided by the manufacturer, this item is compatible with the following makes, models and years: