EBC X / XC series - Fully floating brake discs for the front wheel
These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides.
The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased.
The weight of the new X and XC series is reduced by an additional 5-10% thanks to the 6-rivet system with a lightweight inner ring, which in turn represents an improvement over conventional brake discs.
The new rotors feature EBC's exclusive and patented SD system, whose square rivets in the brake disc recesses, under the heat generated during braking, allow unrestricted expansion of the outer and inner rings without affecting the riveted joint.
Such deterioration occurs when the brake disc heats up under heavy braking and the outer ring touches the (usually round) rivets that separate the outer ring from the inner ring. The new EBC system avoids this problem, which causes 100% of brake disc defects caused by disc distortion and vibration.
What is the SD system? It is the new square riveting system from EBC. This system completely prevents the distortion of the brake disc, increases the service life of the brake disc and improves the durability of the braking effect. OUTSIDE DIAMETER: 320MM INSIDE DIAMETER: 132.2MM CIRCLE SIZE: 150 MM HOLES QUANTITY: 6 HOLE DIAMETER: 8.5 MM THICKNESS: 4.5MM VERSION: FLOATING
APPLICATIONS OF THIS PRODUCT: According to the data provided by the manufacturer, this article is compatible with the following brands, models and years: YAMAHA MT henceforth1 1700 90 CV, 66 KW 2CIL. RP121 5YU1 BASTIDORES: RP121 henceforth00301-- 2005 YAMAHA MT henceforth1 1700 90 CV, 66 KW 2CIL. RP121 5YU3 BASTIDORES: RP121 henceforth08485-- 2006 YAMAHA MT henceforth1 1700 90 CV, 66 KW 2CIL. RP121 5YU4 BASTIDORES: RP121 henceforth09395-- 2006