EBC MX brake disc for off-road motorcycles. MADE IN THE UK.
The aim of development is to improve braking performance compared to the original brake disc. EBC uses low carbon HPSR steel, which has an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick layer of zinc, which wears off in the contact zone of the brake pads already during braking. Only in this area can slight oxidation form after a long period of use.
The brake discs are drilled in a birdcage pattern to achieve as few holes as possible while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the performance of the brakes in the wet and the less wear.
- Rigid brake disc.
- Made of carbon steel with heat treatment.
- Braking surface drilled with an optimized hole pattern.
- Radially ground.
- Galvanized to protect it from corrosion.
- EBC recommends EBC Organic TT brake pads or, for sport riders, EBC sintered brake pads in R or MXS compound.
- Independent design.
- The thickness of the brake disc may vary compared to the original part. OUTSIDE DIAMETER: 300MM INSIDE DIAMETER: 105.2MM CIRCLE SIZE: 120 MM HOLES QUANTITY: 6 HOLE DIAMETER: 6.5 MM thickness: 5mm VERSION: RIGID