Feycolor Relafloor 347 2K PU Floor Coating with hardener

UV resistant colored floor covering for interior and exterior use on concrete, cement resurfacing, asphalt or primed metals such as steel, galvanized steel or aluminium.

Abrasion high resistance

UV-resistant

good resistance to alkalis and acids

Fast dry

low solvent content

universally applicable

Technical data

A:B mix ratio

8:1 weight ratio

Coverage 0.2 - 0.4 kg/m²

Prosecution

Recommended primer for metals: FEYCOPOX 510

Accumulation system for slip resistance R10:

Add 15% RELAFLOOR 9910 anti-slip additive fine to RELAFLOOR 3470 and mix with a low-speed electric stirrer (approx. 300-400 kg/m²). with a slow running electric stirrer (approx. 300-400 rpm).

Apply the mixed material (0.6 - 0.8 kg/m²) with a short, solvent resistant floor roller.

Accumulation system for slip resistance R12:

Apply 0.6 - 0.8 kg/m² of RELAFLOOR 3470 with a short-nap, solvent-resistant roller.

Then sand the surface with quartz sand (grain size 0.3 - 0.8) at a rate of approx. 2.5 - 3 kg/m².

Remove excess sand the next day.

Then seal the surface again with RELAFLOOR 3470 (0.5 - 0.7 kg/m²).

Colour: RAL 7035 (light grey)

Content: 4.5kg