HELICOIL® plus refill pack (thread inserts only)

HELICOIL® plus thread inserts are made of austenitic chrome-nickel steel (tensile strength of at least 1400 N/mm2). The rolled nut thread has a high surface quality. This guarantees a strong, wear-resistant thread with an extremely low and constant Gewindereibment. In Wiederholverschraubungen, therefore, a higher and constant preload force is achieved with the same tightening torque. At the same time, this leads to better utilization of the elastic resistance of the high-strength bolts. Torsional stress is significantly reduced: Compared to cut threads, the surface roughness of HELICOIL® plus is up to 90 percent lower.

DIAMETER: M5 X 0.8

LENGTH: 7.5MM

Container: refill pack

Content: 20 pieces.