Damaged guide pin bellows guide bushings corrode caliper support - this leads to sluggish movement of the caliper guide and other braking problems
With this Honing Brush (application by power tool) which has a the guide bushes of "LUCAS" -Faustsätteln be ground with guide lubricated metal pin blank again
Because the specially adapted diameter of the bore is dimensionally stable
Huge time savings as the cleaning process takes only a few seconds
Notes:
Before applying the guide bushings must be made free of grease
The cordless screwdriver with max. Running at 500 revolutions per minute, and only in a clockwise (clockwise) direction!
For the permanent lubrication of the cleaned guide bushes are, by suitable. B. Tie Plastilube (see accessories) excellent