Kukko puller Set, 2 arms, 2 parts

2-arm Sepzial extractor to support inner rings in the front wheel hub on Audi / VW, with adapter for fixing on hollow axles:

The puller with an adapter from VAG (ISA V10.1) is particularly suitable for cases in which the wheel bearing on the front axle falls apart during disassembly and put only the inner ring on the axle remains.

Especially with vehicles like the VW Golf IV with riveted ABS rotor (hub 1JO407613G) this puller provides excellent services

The adapter provides concise editing and with the side clamp (2 puller use) the sharp puller legs are pressed against the inner ring

In this way, the ring is deformed so far that an easy and safe removal is possible.

The clamp (2 puller use) presses the puller hooks firmly to the deducted part

Specs:

Hex: 22mm

Weight: 2.0kg

and

2-arm detach puller "COBRA" (210 series) with reversible trigger hook and side clamp

Suitable for many purposes where normal extractors cannot be used.

To release flush fit parts, such as journal bearings, ball bearing races, sprockets, etc.

The puller hooks are reversible and used on both sides, with different hook shapes - The page has a normal stripped claw, the other release claw

The claws separate from the grip legs of the puller by squeezing the side clamp under the deducted part and claw is passing before the actual removal process

The multi-thread hole in the trigger hook allows working with a variable depth of cut

The forceps press the extractor hooks firmly to the deducted part

Specs:

Wingspan: 95mm (3 3/4")

Cutting Depth: 170mm (6 3/4")

Hex: 22mm

The maximum power:. 5 to / 100Nm

Weight: 2.60kg

Scope of supply:

2-arm Sepzial puller to support inner rings

2-arm release puller "COBRA"

1 each end wrench for spindle and bushing

1 Hex driver with T-handle for ferrule mounting

1 Tube of spindle grease

1 Kukko chip
TYPE: EXTERNAL EXTRACTOR
RANGE: 95MM
INTENDED USE: BEARINGS / BEARINGS
DRIVE: EXTERNAL HEXAGON