HYMEC Clutch replacement RELEASE CYLINDER

INCLUDED LENGTH: 55 mm

MOUNTING SIZE: 70mm to 72mm

If you own an older HYMEC coupling system and one

Replacement slave cylinders require reference to current part number

However, we are not sure that we have developed a method that allows you to

Finding the replacement part number easier.

Remove the slave cylinder from the motorcycle and press the button

master cylinder until the slave cylinder operating rod is fully

He's withdrawn. The piston in the slave cylinder now touches the brass cap.

at the rear of the slave cylinder. If the slave cylinder

stopped working, it can be removed from the pressure line

and the drive rod for measuring slowly and carefully

be inserted into the slave cylinder.

Please note that the measured length is not the operating length

corresponds to - working length is 16 mm longer than retracted

Length. After the measurement, dispose of your old slave cylinder.

not yet, because you may still need the lid or stand.

All MAGURA HYMEC replacement slave cylinders come standard with cap

and standard key as shown in the pictures.

If the slave cylinder needs between two operating lengths

always order the longest version and use

Spacer between support and Bowdenzugbefestigung to the operating length

to adapt to your motorcycle.