MAXI SEAL WE-Set combined repair bodies, with guide wire.

The repair probes have an integrated guidewire, which simplifies the insertion of the probes into the suture channel. in the stitch channel.

Using the Super-Solution as a vulcanization accelerator, the chemical coating on the probes is activated and self-vulcanization occurs.

By using the components specified by us, damages are safely and professionally repaired and the tire can be used again without restriction, in accordance with the tire specifications.

A professional repair does not restrict the tire's specifications.

Application range:

MAXI SEAL can be used for radial and crossover tires.

Please use the repair bodies only in the tread area.

Super-Solution is recommended as a vulcanization accelerator.

Please also note the repair tables on our packaging.

Processing/brief description:

After dismounting the tire, mark the damaged area and remove the foreign body.

Treat the vulcanization area on the tire professionally according to the instructions and cover it with Super-Solution.

Coat the stem of the probe with Super-Solution and insert it into the puncture channel using the guide wire, until the conical part of the repair round protrudes 3-4mm outside the tire.

Pull this piece along with the guide pin using pliers (do not pull on the pin).

Roll/press the patch well on the inside and cover it with the inner lining.

Scope of delivery:

25 repair probes

1 roughing cutter

60 ml of vulcanizing solution in tubes