JMT Lithium Ion Batteries

State-of-the-art batteries recognizable by the red casing cover.

Also included in delivery

foam blocks

5 x 120 x 90 x 7 (mm)

1 x 120 x 90 20 (mm)

sleep mode

By pressing the on/off button for about 3 seconds, the LED status indicator flashes red and the

LED status indicator and electrically disconnects the battery terminals from the battery itself.

If it is pressed again for 3 seconds, a green flash occurs and the battery can be used "normally" again.

JMT Lithium Ion Batteries

State-of-the-art batteries recognizable by the red casing cover.

Also included in delivery

foam blocks

5 x 120 x 90 x 7 (mm)

1 x 120 x 90 20 (mm)

sleep mode

By pressing the on/off button for about 3 seconds, the LED status indicator flashes red and the

LED status indicator and electrically disconnects the battery terminals from the battery itself.

If it is pressed again for 3 seconds, a green flash occurs and the battery can be used "normally" again.

JMT Lithium Ion Batteries

State-of-the-art batteries recognizable by the red casing cover.

Also included in delivery

foam blocks

5 x 120 x 90 x 7 (mm)

1 x 120 x 90 20 (mm)

sleep mode

By pressing the on/off button for about 3 seconds, the LED status indicator flashes red and the

LED status indicator and electrically disconnects the battery terminals from the battery itself.

If it is pressed again for 3 seconds, a green flash occurs and the battery can be used "normally" again.

Spacer(S)

The battery is equipped with one or more spacers that are glued under the battery with the supplied adhesive tape so that the battery fits exactly into the battery box.

Water resistant (W)

The battery is completely waterproof and will not be damaged when cleaning the bike with high pressure.

Indicator (I)

All batteries are equipped with a battery status indicator.

Just press the test button. If all 3 blue LEDs light up, the battery is fully charged. If only 2 LEDs light up, the battery is only half charged (med). At the latest when only one LED is still lit (low), the battery must be charged.

Polo Quattro (Q)

The battery is equipped with four pole connections. Depending on how the battery is installed, the positive pole is either on the left or on the right. This battery replaces many conventional lead-acid batteries in use.

By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5kg of weight can be saved without any significant effort.

The following advantages speak in favor of JMT lithium-ion batteries:

- about 1/3 the weight of a comparable lead acid battery

- an unbeatable cost/weight ratio

- can be installed in any position, as it does not contain acid

- does not contain heavy metals

- balanced discharge/charge of all cells by means of the balancer

- fast charging with high charging current possible (up to 90% in 6 minutes)

- very low self-discharge (max. 5% per month)

- even at high temperatures it still performs well up to 60°C

- safe technology and long service life

Lead batteries can only use 30% of their capacity due to their specific characteristics,

while lithium ion batteries can use almost 100% of their capacity.

For this reason, the lithium versions of JMT batteries require only 1/3 the capacity of a comparable lead acid battery for the same starting power.

An integrated processor ("balancer") also ensures a uniform state of charge for all cells.

With the help of adapters, the dimensions of the lithium-ion batteries correspond to those of the original lead batteries.

In addition, the connections are identical, so the battery can be replaced in a few minutes without the need for further adjustment.

Please note that only suitable chargers such as the JMP 800, JMP 4000 or corresponding workshop units are used for charging.

For fast charging we recommend the JMP 30000 Pro workshop unit. This can recharge a lithium-ion battery to 90% in just 6 minutes.

See technical data below for maximum recommended charging currents.

In no case should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage greater than 14.9 volts before actual charging begins.

The maximum charging voltage of 14.9 volts must never be exceeded.

The manufacturer guarantees a sufficient starting capacity down to -5 degrees Celsius.

TECHNOLOGY

JMT's lithium ion batteries use Iron Phosphate (LiFePO4) as cathode material and employ the lithium polymer process in their manufacture.

Therefore, they cannot burst or explode during normal operation.

The technology and manufacturing process guarantee the highest level of safety for lithium batteries.

- Maintenance-free 12 V lithium-ion battery

- recommended charging current 3.5 A

- maximum charging current for fast charging 28 A

Comparable in dimensions and connections with:

Yuasa Manufacturer No.

U1-7

U1-9

U1R-7

U1R-9

12N24-3

12N24-3A

12N24-4

Water resistant (W)

The battery is completely waterproof and will not be damaged when cleaning the bike with high pressure.

Indicator (I)

All batteries are equipped with a battery status indicator.

Just press the test button. If all 3 blue LEDs light up, the battery is fully charged. If only 2 LEDs light up, the battery is only half charged (med). At the latest when only one LED is still lit (low), the battery must be charged.

Polo Quattro (Q)

The battery is equipped with four pole connections. Depending on how the battery is installed, the positive pole is either on the left or on the right. This battery replaces many conventional lead-acid batteries in use.

By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5kg of weight can be saved without any significant effort.

The following advantages speak in favor of JMT lithium-ion batteries:

- about 1/3 the weight of a comparable lead acid battery

- an unbeatable cost/weight ratio

- can be installed in any position, as it does not contain acid

- does not contain heavy metals

- balanced discharge/charge of all cells by means of the balancer

- fast charging with high charging current possible (up to 90% in 6 minutes)

- very low self-discharge (max. 5% per month)

- even at high temperatures it still performs well up to 60°C

- safe technology and long service life

Lead batteries can only use 30% of their capacity due to their specific characteristics,

while lithium ion batteries can use almost 100% of their capacity.

For this reason, the lithium versions of JMT batteries require only 1/3 the capacity of a comparable lead acid battery for the same starting power.

An integrated processor ("balancer") also ensures a uniform state of charge for all cells.

With the help of adapters, the dimensions of the lithium-ion batteries correspond to those of the original lead batteries.

In addition, the connections are identical, so the battery can be replaced in a few minutes without the need for further adjustment.

Please note that only suitable chargers such as the JMP 800, JMP 4000 or corresponding workshop units are used for charging.

For fast charging we recommend the JMP 30000 Pro workshop unit. This can recharge a lithium-ion battery to 90% in just 6 minutes.

See technical data below for maximum recommended charging currents.

In no case should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage greater than 14.9 volts before actual charging begins.

The maximum charging voltage of 14.9 volts must never be exceeded.

The manufacturer guarantees a sufficient starting capacity down to -5 degrees Celsius.

TECHNOLOGY

JMT's lithium ion batteries use Iron Phosphate (LiFePO4) as cathode material and employ the lithium polymer process in their manufacture.

Therefore, they cannot burst or explode during normal operation.

The technology and manufacturing process guarantee the highest level of safety for lithium batteries.

- Maintenance-free 12 V lithium-ion battery

- recommended charging current 3.5 A

- maximum charging current for fast charging 28 A

Comparable in dimensions and connections with:

Yuasa Manufacturer No.

U1-7

U1-9

U1R-7

U1R-9

12N24-3

12N24-3A

12N24-4

Water resistant (W)

The battery is completely waterproof and will not be damaged when cleaning the bike with high pressure.

Indicator (I)

All batteries are equipped with a battery status indicator.

Just press the test button. If all 3 blue LEDs light up, the battery is fully charged. If only 2 LEDs light up, the battery is only half charged (med). At the latest when only one LED is still lit (low), the battery must be charged.

Polo Quattro (Q)

The battery is equipped with four pole connections. Depending on how the battery is installed, the positive pole is either on the left or on the right. This battery replaces many conventional lead-acid batteries in use.

By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5kg of weight can be saved without any significant effort.

The following advantages speak in favor of JMT lithium-ion batteries:

- about 1/3 the weight of a comparable lead acid battery

- an unbeatable cost/weight ratio

- can be installed in any position, as it does not contain acid

- does not contain heavy metals

- balanced discharge/charge of all cells by means of the balancer

- fast charging with high charging current possible (up to 90% in 6 minutes)

- very low self-discharge (max. 5% per month)

- even at high temperatures it still performs well up to 60°C

- safe technology and long service life

Lead batteries can only use 30% of their capacity due to their specific characteristics,

while lithium ion batteries can use almost 100% of their capacity.

For this reason, the lithium versions of JMT batteries require only 1/3 the capacity of a comparable lead acid battery for the same starting power.

An integrated processor ("balancer") also ensures a uniform state of charge for all cells.

With the help of adapters, the dimensions of the lithium-ion batteries correspond to those of the original lead batteries.

In addition, the connections are identical, so the battery can be replaced in a few minutes without the need for further adjustment.

Please note that only suitable chargers such as the JMP 800, JMP 4000 or corresponding workshop units are used for charging.

For fast charging we recommend the JMP 30000 Pro workshop unit. This can recharge a lithium-ion battery to 90% in just 6 minutes.

See technical data below for maximum recommended charging currents.

In no case should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage greater than 14.9 volts before actual charging begins.

The maximum charging voltage of 14.9 volts must never be exceeded.

The manufacturer guarantees a sufficient starting capacity down to -5 degrees Celsius.

TECHNOLOGY

JMT's lithium ion batteries use Iron Phosphate (LiFePO4) as cathode material and employ the lithium polymer process in their manufacture.

Therefore, they cannot burst or explode during normal operation.

The technology and manufacturing process guarantee the highest level of safety for lithium batteries.

- Maintenance-free 12 V lithium-ion battery

- recommended charging current 3.5 A

- maximum charging current for fast charging 28 A

Comparable in dimensions and connections with:

Yuasa Manufacturer No.

U1-7

U1-9

U1R-7

U1R-9

12N24-3

12N24-3A

12N24-4
VOLTAGE: 12V
CAPACITY: 3.5AH (10H)
ENERGY CAPACITY: 42WH
VERSION: LITHIUM
ON: YES
CCA AS MANUFACTURER: 210 A
PRÜFNORM DES HERSTELLERS: SAE
SAE CHECKED WITH JMP-TESTER: 215 A
DIN TESTED WITH JMP-TESTER: 200 A
IN TESTED WITH JMP-TESTER: 120 A
LENGTH: 166MM
WIDTH: 123MM
HEIGHT: 163MM
READY WEIGHT: 0.8KG
ACID PACK INCLUDED: NO
TYPE OF CONNECTION: FRONT
TERMINAL/TERMINAL/POSITIVE POLE: BEHIND RIGHT
TERMINAL/TERMINAL/NEGATIVE POLE: REAR LEFT
GAS DRAIN: WITHOUT