HIGHSIDER APOLLO LED tail light, brake light, turn signal module

LED tail light, brake light, turn signal module suitable for recessed or surface mounting, black aluminium ring with tinted glass, E-tested. There are two very bright SMDs in the center. The outer ring consists of COBs (Chip On Board). With this technique, the semiconductor (without housing) is glued directly onto a printed circuit board. This module is supplied with a black anodised aluminium ring that fits over the base body.

The best comes at the end the taillight and taillight/indicator series from HIGHSIDER give you the safety you need and the look you want whether cruiser, athlete or speedster.

Dimensions:

A1: 13 mm

A2: 9 mm

D1: 22 mm

D2: 20 mm

Threaded bolts: M8, length 12 mm

Connections:

Black wire = ground (-)

Yellow Wire = Tail Light (+)

Red cable = stoplight (+)

Blue = turn signal (+)

Scope of delivery: 1 pair

Note:

The unit can be installed flat without an aluminium ring, so that only the lens is visible. A 20 mm wide hole must be drilled for this purpose. Alternatively, the unit can be mounted with the aluminium ring on e.g. a mounting plate on the vehicle.
APPROVAL: CE APPROVAL
COMPOSITION: ALUMINUM
COLOR DE CUBIERTA: AHUMADO
LIGHT TYPE: LED
POSICIÓN: TRASERO
COLOUR: BLACK
PACKING: PER PAIR