The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick layer of zinc, which is crushed in the area of the contact patch of the brake pads when braking. It is only in this area that a light oxide film with a longer service life can form.
The brake discs are drilled in the bird's-eye design to fit through with as few holes as possible while optimizing the cleaning of the disc from rainwater and brake dust. The fewer holes drilled, the better the wet braking behavior and less wear.
- Rigid brake disc.
- Made of low carbon HPSR rolled steel.
- Drilled braking surface with optimized hole pattern.
- Radially ground.
- Galvanized to protect against corrosion.
- EBC recommends EBC Organic brake pads or for sporty drivers EBC Double-H sintered brake pads.
- Independent design. OUTER DIAMETER: 230MM INSIDE DIAMETER: 116.2MM CIRCLE SIZE: 140 MM QUANTITY OF HOLES: 3 HOLE DIAMETER: 6.5 MM THICKNESS: 4.7MM VERSION: RIGID
APPLICATIONS OF THIS PRODUCT: According to the data provided by the manufacturer, this article is compatible with the following brands, models and years: ITALJET JUPITER 125 11,7 CV, 8,6 KW 1CIL. JC BASTIDORES: --- 2002-2003 ITALJET JUPITER 250 19 CV, 14 KW 1CIL. JC BASTIDORES: --- 2001-2003 YAMAHA YP 250 A MAJESTY ABS 21 CV, 15,5 KW 1CIL. - 5GM5 BASTIDORES: --- 2001-2002 YAMAHA YP 250 A MAJESTY ABS 21,7 CV, 16 KW 1CIL. SG04B 5SJ5 BASTIDORES: SG04B henceforth00301-- 2003 YAMAHA YP 250 MAJESTY 21 CV, 15,5 KW 1CIL. SG041 5GM2 BASTIDORES: SG041 henceforth01201-- 2000 YAMAHA YP 250 MAJESTY 21 CV, 15,5 KW 1CIL. SG041 5GM9 BASTIDORES: SG041 henceforth20354-- 2001 YAMAHA YP 250 MAJESTY 21 CV, 15,5 KW 1CIL. SG048 5SJ2 BASTIDORES: SG048 henceforth03552-- 2002 YAMAHA YP 250 MAJESTY 21 CV, 15,5 KW 1CIL. SG048 5SJ9 BASTIDORES: SG048 henceforth06964-- 2003