EBC Contour Brake Disc

The aim of development is to improve braking performance compared to the original brake disc. EBC uses heat-treated carbon steel for the MX Contour brake rotors. This steel is much more resistant to rust than cast steel.

In addition, the entire surface is protected with a 3 micron thick zinc coating, which wears off in the contact area of the brake pads already during braking.

Only in this area a slight rust with a longer service life can form.

The brake discs are drilled in a birdcage pattern to achieve as few holes as possible while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the performance of the brakes in the wet and the less wear.

- Cutting-edge Contour design

- Super-light, rigid brake disc, completely new profile.

- Made of carbon steel with heat treatment.

- Braking surface drilled with an optimized hole pattern.

- Radially ground.

- Zinc plated to protect it from corrosion.

- Independent design.

- The thickness of the brake disc may vary from the original part.

MADE IN THE UK
OUTER DIAMETER: 290MM
INSIDE DIAMETER: 130.2MM
CIRCLE SIZE: 150 MM
HOLES QUANTITY: 5
HOLE DIAMETER: 10.5 MM
THICKNESS: 4.5MM
VERSION: RIGID


APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
KAWASAKI NINJA 250 R EX NINJA 33 CV, 24 KW 2CIL. EX250KKDA K8F BASTIDORES: EX250KKDA henceforth0052-EX250KKDA henceforth7778 2008
KAWASAKI NINJA 250 R EX NINJA 33 CV, 24 KW 2CIL. EX250KKDA K9F BASTIDORES: EX250KKDA henceforth7779-EX250KKDA-21814 2009
KAWASAKI NINJA 250 R EX NINJA 33 CV, 24 KW 2CIL. EX250KKDA KAF BASTIDORES: EX250KKDA-21815-- 2010
KAWASAKI NINJA 250 R EX NINJA 33 CV, 24 KW 2CIL. EX250KKDA KBF BASTIDORES: EX250KKDA-28635-EX250KKDA-37268 2011
KAWASAKI NINJA 250 R EX NINJA 33 CV, 24 KW 2CIL. EX250KKDA KCF BASTIDORES: EX250KKDA-37269-- 2012-2014