EBC brake discs. MADE IN THE UK.

The aim of the development is to improve the braking performance compared to the original brake disc. EBC uses HPSR low carbon steel, which has an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick layer of zinc, which wears off in the area of the contact patch of the brake pad during braking. Only in this area can it rust more easily over a long life.

The brake discs are perforated in Vogelschwingendesign in order to get along with as few holes as possible and to optimize the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the less wear.

- Rigid brake disc.

- Made of low carbon laminated HPSR steel.

- Drilled brake surface with optimized hole pattern.

- Radially ground.

- Galvanized for protection against corrosion.

- EBC recommends EBC eco brake pads or EBC Double-H sintered brake pads for sporty drivers.

- Independent design.
OUTER DIAMETER: 240MM
INSIDE DIAMETER: 82.2MM
CIRCLE SIZE: 100 MM
HOLES QUANTITY: 5
HOLE DIAMETER: 8.5 MM
THICKNESS: 3.8MM
VERSION: RIGID


APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
YAMAHA XC 125 X CYGNUS X 11,2 CV, 8,2 KW 1CIL. SE411 4P91 BASTIDORES: SE411-100272-- 2007
YAMAHA XC 125 X CYGNUS X 11,2 CV, 8,2 KW 1CIL. SE411 4P93 BASTIDORES: SE411-130102-- 2008
YAMAHA XC 125 X CYGNUS X 11,2 CV, 8,2 KW 1CIL. SE411 4P95 BASTIDORES: SE411-302561-- 2009
YAMAHA XC 125 X CYGNUS X 11,2 CV, 8,2 KW 1CIL. SE411 4P97 BASTIDORES: SE411-340475-- 2010
YAMAHA XC 125 X CYGNUS X 11,2 CV, 8,2 KW 1CIL. SE411 4P99 BASTIDORES: SE411-380101-- 2011
YAMAHA XC 125 X CYGNUS X 11,2 CV, 8,2 KW 1CIL. SE411 4P9B BASTIDORES: SE411-410101-- 2012-2016