EBC Contour Brake Disc

The aim of development is to improve braking performance compared to the original brake disc. EBC uses heat-treated carbon steel for the MX Contour brake rotors. This steel is much more resistant to rust than cast steel.

In addition, the entire surface is protected with a 3 micron thick zinc coating, which wears off in the contact area of the brake pads already during braking.

Only in this area a slight rust with a longer service life can form.

The brake discs are drilled in a birdcage pattern to achieve as few holes as possible while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the performance of the brakes in the wet and the less wear.

The floating brake discs are equipped with EBC's exclusive and patented SD system, whose square rivets in the brake disc recesses under the heat generated during braking allow unlimited expansion of the outer and inner ring without affecting the riveted joint.

- Cutting-edge Contour design

- Stiff, super-light brake disc, completely new profile

- Made of carbon steel with heat treatment.

- Braking surface drilled with an optimized hole pattern.

- Radially ground.

- Zinc plated to protect it from corrosion.

- Independent design.

- The thickness of the brake disc may vary from the original part.

MADE IN THE UK
OUTSIDE DIAMETER: 310MM
INSIDE DIAMETER: 118.2MM
CIRCLE SIZE: 134 MM
HOLES QUANTITY: 6
HOLE DIAMETER: 6.5 MM
thickness: 4mm
VERSION: FLOATING


APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
SUZUKI DR-Z 400 SM 40 CV, 29,4 KW 1CIL. WVB81112 K5 BASTIDORES: B81112 henceforth0100001-B81112 henceforth0103148 2005
SUZUKI DR-Z 400 SM 40 CV, 29,4 KW 1CIL. WVB81112 K6 BASTIDORES: B81112 henceforth0103149-B81112 henceforth0106275 2006
SUZUKI DR-Z 400 SM 40 CV, 29,4 KW 1CIL. WVB81112 K7 BASTIDORES: B81112 henceforth0106276-B81112 henceforth0110837 2007
SUZUKI DR-Z 400 SM 40 CV, 29,4 KW 1CIL. WVB81112 K8 BASTIDORES: B81112 henceforth0110838-B81112 henceforth0119999 2008
SUZUKI DR-Z 400 SMU 31 CV, 23 KW 1CIL. WVB81110 K7 BASTIDORES: B81110 henceforth0100242-- 2007
SUZUKI DR-Z 400 SMU 34 CV, 25 KW 1CIL. WVB81110 K5 BASTIDORES: B81110 henceforth0100001-B81110 henceforth0100087 2005
SUZUKI DR-Z 400 SMU 34 CV, 25 KW 1CIL. WVB81110 K6 BASTIDORES: B81110 henceforth0100088-B81110 henceforth0100241 2006