MOTUL DOT 4 LV is a polyglycol based synthetic brake fluid for brake systems, hydraulic clutches, ESP, ABS and ASR units with manufacturer recommendation DOT 4 ISO Class 6, with high boiling points and better flow behavior at low temperatures.
FMVSS STANDARDS 116 DOT 3 / 116 DOT 4
ISO 4925 (Classes 3, 4 and 6)
SAE J1034 / J1703 J1704
Miscible with all DOT 3, DOT 4 and DOT 5.1 products. Particularly durable brake fluid due to its high wet boiling point. The resistance to high temperatures and the stability due to the high dry boiling point guarantee high safety. Low viscosity at low temperatures improves the response of ESP, ABS and ASR units. Allows the braking system to work effectively in extreme conditions. Corrosion resistant; it behaves neutrally towards the joints of the brake system.
RECOMMENDATIONS AND NOTES:
- Replacement intervals: Between 12 and 24 months (according to manufacturer's recommendation).
- Seal carefully and store in the original container to avoid moisture absorption.
- For safety reasons, the brake fluids must not be topped up, but replaced.
WARNING: Not miscible with silicone-based brake fluids (DOT 5) and special mineral-based fluids (eg LHM). The liquid can attack the paint and plastic surfaces of the vehicle. Thoroughly rinse wet surfaces with water. In case of contact with the skin, also rinse with plenty of water.