The pre-filled ColorMatic spray paint can is pre-filled with specific propellant and additives and filled with the desired color using VitoMat filling machines. Innovative spray and valve technology guarantees fine atomization with a wide jet, high application rate and constant pressure, best processing and professional end result quality.
2K pre-fill HS Topcoat offers the highest quality in terms of gloss, drying, weather and gasoline resistance.
Quality and properties
An aerosol can pre-filled with propellant, solvent and hardener (contains isocyanate) in a separate cartridge. The 2K HS topcoat is transferred to the can via a filling device and thus becomes the final ready-to-use product.
By mixing the 2K topcoat with the hardener, optimum quality is achieved in terms of gloss, cure, weather and chemical resistance.
Simple processing that saves time
very good atomization
Easy to apply as a complementary varnish
Ideal for covering stains
Physical and chemical data
Folder base: acrylic
Color: after filling
Odor: solvent
Performance:
Depending on the condition and color of the substrate,
400 ml are sufficient for approx. 0.8 m².
Substratum:
Depending on the color of the substrate, use Filler Primer HG1 - HG8, ColorMatic 2K Filler Primer, Art. No. 195 327, ColorMatic 1K Primer for ALU, Art. No. 190 278, ColorMatic 1K Zinc Primer, Art. No. 190 285, ColorMatic 1K Epoxy Primer, #174 414, ColorMatic 1K Filler, beige, #856 556, ColorMatic 1K Filler, grey, #874 987, sanded cured paint
Drying (at 20°C, 50% relative humidity):
The drying time depends on the ambient temperature, humidity, the thickness of the applied film and the type of paint filled (information from the specialist dealer).
Shelf Life/Storage - Unfilled Cans: 36 months
Shelf life full cans: approx. 12 hours. (=10°-25°C, max. 60% relative humidity)
Packaging/content:
Aerosol cans, maximum nominal volume 400 ml. Filling quantity 100ml