S45 quick sling for use in open head rifles | Exclusive to Cressi and made and assembled 100% in Spain | Outside diameter Ø18 mm and inside Ø2.5 mm | shore hardness 42 | black color | Manual assembly with Dyneema Abellán Howitzer blocked with pure Dyneema rope without sheath (less erosive) of Ø1.5 mm and double constrictor knot | Bridge in pure Dyneema with Ø2 mm cover | Pure latex from Malaysia without any type of filler or mixture of impurities in its highly elastic composition that increases the range of the shot and its inertia and penetration capacity.
Presentation in fast rubber of the S45 model for use in rifles with an open head or as a second rubber.
The assembly is done manually with a high production control and standardized systems to avoid irregularities in production: Dyneema Abellán wishbone blocked with pure Dyneema without sheath (less erosive) of Ø1.5 mm and double constrictor knot. The bridge is made of pure Dyneema with a Ø2 mm sheath.
Its spectacular power is due, on the one hand, to the hardness of its composition (shore 42 against usual levels of 38 to 40) and to its diameter of 18 mm against the 16 m/15 mm of normal rubbers.
Its composition, diameter and the small diameter of the longitudinal cannula provide it with great resistance to pressure, which also makes it ideal for deep-sea fishing.
Exclusive Cressi Sub rubbers made and assembled 100% in Spain. They have been carefully studied for use in high-level fishing and in competition. Its composition, level of hardness and thickness are the result of countless tests on different prototypes and the final product meets the requirements of elite fishermen, in all types of spearguns with any type of shaft.
Latex: pure latex from Malaysia without any type of filler or mixture of impurities in its composition, it only has the dye additive that transforms it into opaque black (only one gram dyes 5 kg of latex). No filler is added to its composition so as not to harm the natural characteristics of latex recovery speed and elasticity. The latex, once coagulated, dries naturally (outdoors) for a minimum of 40 days.
Their pure composition makes them have an outstanding elasticity that translates into a homogeneous accompaniment of the shaft, thus increasing the range of the shot and the inertia and penetration capacity of the same, with a reduced load difficulty compared to other rubbers of lower performance. Precisely this elasticity allows the easy use of short measures (depending naturally on the tastes and capacity of the fisherman), increasing the thrust path of the rubber on the rod, a factor that places it at a clear advantage over traditional rubbers, especially those of superior quality. diameter. Extremely resistant to the action of ultraviolet rays, saltpeter and ozone, as well as intensive use for a long time without loss of performance.
Resistant to the action of ultraviolet rays, saltpetre and ozone, as well as intensive use for a long time without loss of performance.
Exclusive manufacturing with straight tube: unlike other manufacturers, Cressi latex rubbers are perfectly straight, as they are produced in short strips of one meter in length instead of long rolls that involve lower manufacturing costs but a longitudinal section always curved.
Measurements: produced in measurements studied for rifles with 60 cm, 75 cm, 90 cm, 100 cm, 110 cm and 120 cm tubes.
Presentation: they are served with screen printing in white latex to identify the article and with vacuum packaging for easier display in the store and isolation from the outside.