800x600 Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4

Made with very strict finishing parameters and dimensions for maximum adaptation to all types of mechanisms.

Machining carried out with hard metal stainless tools to avoid contamination of the rod material and possible rust spots in the machined areas.

SANDVIK steel externally hardened using a unique high temperature vacuum plasma process. This process achieves that the external thickness achieves a hardness around 60 HRC without impairing the flexural strength of the rod.

Very strict control process (rod by rod prior to machining) to check the perfect straightness of the rod.

AISI 301 spring stainless steel flap, 0.8 mm thick. Mechanical resistance 1269 Nw / mm2 close to that of the rod itself. 2mm pin. Completely nuanced finish to avoid shine. Length in proportion to the rod; 55 mm in sizes from 90 to 120 cm and 70 mm from 130 to 150 cm. Inserted in the shaft with a minimum recess in the area near the pin to avoid reducing the resistance of the tip and to maximize hydrodynamics. O-ring for closing the flap as standard (red color).

Reinforced lugs with curved machining radius. Versatile design for metal and Dyneema howitzers. High tenacity material and lace system, which guarantees a resistance of 340 kg of tension.

Particularly resistant and highly penetrating howitzer shaped tip.

Diameter: Ø6.70 mm and Ø7.5 mm.

Measurements: 120, 125, 130, 135, 140 cm.

Descriptive label on removable paper with indication of diameter, measure, reference, EAN and technical details.