CRESSI GLUE GLUE TUBE TO REPAIR NEOPRENE 30 GR (12U) ETA 650000K

Prestigious quick-drying black impact glue used by Cressi for gluing its suits for decades | Made in Italy and with a specific composition for neoprene, it can be recognized compared to other glues by its particular smell | Presentation in tubes of 30 g.
This prestigious quick-drying black impact glue has been used by Cressi for gluing its suits for decades. Made in Italy and with a specific composition for neoprene, it can be recognized compared to other glues by its particular smell.
Presentation in tube of 30 g.
Gluing system:
1. Clean with alcohol and let the two parts to be assembled dry perfectly;
2. Put a layer of glue and let it dry for about 5-10 minutes until it does not stick to your fingers:
3. Glue. For especially important or delicate repairs, apply a second coat after the first has dried. An excess of drying between the two pieces is preferable to the opposite, do not get impatient;
4. Hook, press and maintain the pressure for at least a couple of minutes.
Do not use the glued element before 24 hours. Do not reinforce the gluing externally once it has been done, the diluted glue acts as a solvent.