SEAC Screen is a dive computer with a large, easy-to-read display with contrast and brightness adjustment. All the data you need is visible, on one screen, at a glance.

Even with very thick gloves it is easy to operate all SEAC screen functions, thanks to its two well-defined front buttons. With its long strap it is comfortable, even in a dry suit.

Main functions: Diving (diving managed by the Bühlmann ZHL-16C algorithm), depth meter (autonomous management with a depth meter and stopwatch), apnea (time and depth for those who practice freediving).

Management of 1 or 2 mixtures (Air, Nitrox and others with O2 max 99%). MOD violation warning, decompression stop and overspeed ascent. Planner for "single NDL" dive simulation.

Record up to 40 hours of diving in dive and gauge mode or 18 hours in apnea mode. Data download and software update via USB and the Seac Dive Manager application downloading free of charge on the website www.Seacsub.com



The Screen Seac computer focuses on clarity and readability of all data related to the dive profile. The large display shows all relevant information on a single screen, in legible and distinctive characters. Contrast and brightness can be adjusted, as well as the mode (automatic or manual) and the backlight time (from 2" to 60"). The screen display measures 4x4.7cm and is protected by a resistant casing. rubber cover. Maximum dimensions 6.7x7cm. The strap is long and is designed for the Screen SEAC, this design is to be placed over a dry suit. Total length, at the opposite end of the buckle: about 36 cm. The two well-defined front buttons allow the use of the SEAC Screen computer quickly and easily even with very thick gloves. The SEAC Screen computer operates in three main ways: diving, depth meter and apnea. In diving mode, the dive profile is managed automatically according to the Bühlmann ZHL-16C decompression algorithm. It is compatible with the management of 1 or 2 mixes (air, nitrox and other mixes with up to 99% O2) that alert the user at the most appropriate time to make the change. with light and sound alarms, alarms in case of violation of the decompression stop, excess speed in ascent and exceeding the maximum depth allowed with the mixture in use. In depth gauge mode the Screen Seac computer displays a depth gauge and stopwatch for fully autonomous dive management for the most experienced divers. In freediving mode, it can display the surface and dive times, the current depth and the maximum depth reached during the session. The Screen computer dive planner SEAC allows you to simulate a dive plan display of NDL time based on depth and with the other input data (mix, max PpO2 and algorithm level). The logbook can store up to 40 hours of diving in dive and gauge mode 18 hours in freediving mode. You can download data update software and with USB-C cable and Seac app for free from www.Seacs website ub.com. The USB-C cable may or may not be included in the package, depending on the package purchased. Seac Screen is powered by a CR2450 battery. It can be replaced by the user, but it is recommended to contact an authorized SEAC service to change even the original O-ring of the battery compartment. Others: maximum depth of 100 meters, the calculation times of air exclusion and without saturation, granted maximum altitude alert, selection of fresh or salt water. The Screen Seac computer is available in a console version in combination with a pressure gauge (manometer)