Actualmente no estás en la web de motos, te recomendamos usar mototic para que veas otros recambios de moto y accesorios de motorista.
Cambiar a recomendada
By continuing use this site, you agree to the Terms & Conditions and our use of cookies.

      EBC Brake disc stainless steel 760.00.83

      EBC
      Review (0)
      €110.65
      €114.32
      Save €3.67
      Tax included
      Quantity :
      Order before     and receive it  este viernes

      ¡Producto disponible para envío inmediato!

      EBC HPSR brake disc, rigid version. MADE IN UK.

      The aim of the development is to improve the braking performance compared to the original brake disc. EBC uses low carbon HPSR steel with an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick layer of zinc, which wears off in the area of the contact patch of the brake pads during braking. Only in this area can rust form more easily during extended life.

      The brake discs are drilled in Vogelschwingendesign to get along with as few holes as possible while optimizing the cleaning of the brake disc with rainwater and brake dust. The fewer holes installed, the better wet braking and less wear.

      - Brake ring machined in low carbon HPSR forged steel.

      - Therefore, there is no distortion of the brake disc even at maximum load.

      - Without vitrification of the braking surface, the coefficient of friction remains constant.

      - perforated brake surface with optimized hole pattern.

      - Galvanized for protection against corrosion.

      - Lower manufacturing tolerances.

      - EBC recommends EBC Double-H Sinter brake pads for best braking performance.

      - Independent design.

      -Attention! For ABS vehicles, use the original ABS ring and mounting parts!
      OUTSIDE DIAMETER: 320MM
      INSIDE DIAMETER: 180.5MM
      CIRCLE SIZE: 203.4 MM
      HOLES QUANTITY: 5
      HOLE DIAMETER: 14X16.5 MM
      THICKNESS: 5.3MM
      VERSION: RIGID


      APPLICATIONS OF THIS PRODUCT:
      According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
      BMW K 1200 GT ABS 130 CV, 96 KW 4CIL. K12/K41 0548 BASTIDORES: --- 2003-2005
      BMW K 1200 GT ABS 98 CV, 72 KW 4CIL. K12/K41 0548 BASTIDORES: --- 2003-2005
      BMW K 1200 RS 5,0 PULGADAS LLANTA ABS 130 CV, 96 KW 4CIL. K12/K41 0547 BASTIDORES: --- 2001-2005
      BMW K 1200 RS 5,0 PULGADAS LLANTA ABS 98 CV, 72 KW 4CIL. K12/K41 0547 BASTIDORES: --- 2001-2005
      BMW K 1200 RS 5,5 PULGADAS LLANTA ABS 130 CV, 96 KW 4CIL. K12/K41 0547 BASTIDORES: --- 2001-2005
      BMW K 1200 RS 5,5 PULGADAS LLANTA ABS 98 CV, 72 KW 4CIL. K12/K41 0547 BASTIDORES: --- 2001-2005
      BMW K 1200 S ABS 167 CV, 123 KW 4CIL. K12S/K40 0581 BASTIDORES: --- 2005-2008
      BMW R 1150 RT ABS 95 CV, 70 KW 2CIL. R22/R11RT 0419 BASTIDORES: --- 2004-2005
      BMW R 1150 RT ABS 95 CV, 70 KW 2CIL. R22/R21 0419 BASTIDORES: --- 2002-2003
      EBC
      760.00.83
      11 Items

      Data sheet

      EXTERNAL DIAMETER
      320MM
      CIRCLE MEASUREMENT
      203.4MM
      HOLE DIAMETER
      14X16.5MM
      INSIDE DIAMETER
      203.4MM
      VERSION
      RIGID
      QUANTITY OF HOLES
      5
      THICKNESS
      5.3MM
      ENVIO
      ENVIADO HOY

      No customer reviews for the moment.

      Write your review
      EBC Brake disc stainless steel 760.00.83

      other products in the same category:

      EBC Brake disc stainless steel 760.00.83

      €110.65
      €114.32
      Save €3.67
      Tax included