CRESSI UNDERWATER FISHING ROD PLASMA 125cm (para fusil de 84 cm) EFA 412006

800x600 Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4

Made with very strict finishing parameters and dimensions for maximum adaptation to all types of mechanisms.

Machining carried out with hard metal stainless tools to avoid contamination of the rod material and possible rust spots in the machined areas.

SANDVIK steel externally hardened using a unique high temperature vacuum plasma process. This process achieves that the external hope achieves a hardness around 60 HRC without impairing the flexural strength of the rod.

The combination of steel and treatment makes the specific weight of Plasma rods 12% higher than that of steel traditionally used in rods, in such a way that we obtain benefits in terms of mass, reach and penetration equivalent to rods with a larger diameter. , with a clearly superior hydrodynamics. As an example, a Ø6.70 Plasma rod is equivalent to a Ø7.20 AISI630 or 17-4PH steel rod.

Very strict control process (rod by rod prior to machining) to check the perfect straightness of the rod.

AISI 301 spring stainless steel flap, 0.8 mm thick. Mechanical resistance 1269 Nw / mm2 close to that of the rod itself. Pin and hole proportioned to the diameter of the rod between 2 and 2.5 mm. Length in proportion to the rod; 55 mm in sizes from 90 to 120 cm, and 70 mm from 130 to 150 cm. Two-volume flap, studied for maximum hydrodynamic penetration. Assembly with a slight recess of 1 cm in length that integrates the rivets into the profile and significantly improves the reach of the rod. The recess does not imply loss of resistance since the cotter pin is provided according to the diameter of the rod. O-ring for closing the flap as standard (red color).

Reinforced howitzer socket with a curved machining radius that makes it almost impossible to break the rod through this traditionally weak point. Versatile design for metal and Dyneema howitzers (we recommend polishing the profiles with steel cable for this use). Its design, together with the parameters used for tempering, achieve an extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.

Particularly resistant and highly penetrating howitzer shaped tip.

Available diameters: Ø6.25 mm and Ø6.70 mm.

Measurements: 90, 105, 110, 115, 120, 125, 130, 135, 140, 150 cm (depending on version).

Descriptive label on removable paper with indication of diameter, measure, reference, EAN and technical details.