EBC X / XC series: fully floating brake discs for the front wheel
These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides.
The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased.
The weight of the new ´´X´´ and ´´XC´´ series is reduced by 5-10% more thanks to the 6-rivet system with a light inner ring, which in turn is an improvement over discs conventional brake.
The new brake discs are equipped with EBC's unique and patented SD system, whose square rivets in the brake disc recesses under the heat generated during braking allow the outer and inner ring to expand without affecting the rivet connection.
Such deterioration occurs when the brake disc heats up due to heavy braking and the outer ring touches the (usually round) rivets that separate the outer ring from the inner ring. The new EBC system avoids this problem that causes 100% of brake disc defects caused by disc deformations and vibrations.
What is the SD system? This is EBC's new square rivet system. With this system, deformation of the brake disc is completely prevented, the service life of the brake disc is increased, and the durability of the braking effect is improved. OUTSIDE DIAMETER: 310MM INSIDE DIAMETER: 101.2MM HOLES QUANTITY: 6 VERSION: FLOATING