EBC Stainless steel brake disc for motorcycle SCOOTER 760.34.34

EBC brake disc for all-terrain motorcycles. MADE IN THE UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses heat-treated carbon steel for the brake discs of off-road motorcycles, which are primarily ridden off-road. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick layer of zinc, which is rubbed into the area of the contact patch of the brake pads when braking. Only in this area can a light oxide film form after a long period of time.

The brake discs are drilled in the shape of a bird's wing to work with as few holes as possible and at the same time optimized cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better wet braking behavior and less wear.

- Rigid brake disc.

- Made of heat-treated carbon steel.

- Braking surface drilled with an optimized hole pattern.

- Radially ground.

- Galvanized to protect against corrosion.

- Independent design.

- The thickness of the brake disc may vary with respect to the original part.
OUTER DIAMETER: 260MM
INSIDE DIAMETER: 121.2MM
CIRCLE SIZE: 142 MM
QUANTITY OF HOLES: 4
HOLE DIAMETER: 10.5 MM
THICKNESS: 4.5MM
VERSION: RIGID


APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
SUZUKI AN 650 BURGMAN 50 CV, 37 KW 2CIL. WVBU1111 K3 BASTIDORES: BU1111 henceforth0100001-BU1111 henceforth0110495 2002-2003
SUZUKI AN 650 L BURGMAN EXECUTIVE 56 CV, 41 KW 2CIL. WVBU1114 K3 BASTIDORES: BU1114 henceforth0100001-- 2003