EBC Stainless steel brake disc for motorcycle 760.06.79

Fits ST 1100 front left and right.

EBC HPSR brake disc, rigid version. MADE IN UK.

The aim of the development is to improve the braking performance compared to the original brake disc. EBC uses low carbon HPSR steel with an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick layer of zinc, which wears off in the area of the contact patch of the brake pads during braking. Only in this area can rust form more easily during extended life.

The brake discs are drilled in Vogelschwingendesign to get along with as few holes as possible while optimizing the cleaning of the brake disc with rainwater and brake dust. The fewer holes installed, the better wet braking and less wear.

- Brake ring machined in low carbon HPSR forged steel.

- Therefore, there is no distortion of the brake disc even at maximum load.

- Without vitrification of the braking surface, the coefficient of friction remains constant.

- perforated brake surface with optimized hole pattern.

- Galvanized for protection against corrosion.

- Lower manufacturing tolerances.

- EBC recommends EBC Double-H Sinter brake pads for best braking performance.

- Independent design.
OUTSIDE DIAMETER: 316MM
INSIDE DIAMETER: 144.3MM
CIRCLE SIZE: 166 MM
HOLES QUANTITY: 6
HOLE DIAMETER: 10.5 MM
thickness: 5mm
VERSION: RIGID


APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
HONDA ST 1100 A PAN EUROPEAN ABS 100 CV, 74 KW 4CIL. SC26 N BASTIDORES: SC26-4200007-SC26-4200993 1992
HONDA ST 1100 A PAN EUROPEAN ABS 98 CV, 72 KW 4CIL. SC26 P BASTIDORES: SC26-4300061-- 1993
HONDA ST 1100 A PAN EUROPEAN ABS 98 CV, 72 KW 4CIL. SC26 R BASTIDORES: SC26-4400209-- 1994
HONDA ST 1100 A PAN EUROPEAN ABS 98 CV, 72 KW 4CIL. SC26 S BASTIDORES: SC26-4500104-SC26-4500564 1995
HONDA ST 1100 PAN EUROPEAN 100 CV, 74 KW 4CIL. SC26 L BASTIDORES: SC26-2000024-SC26-2003574 1990
HONDA ST 1100 PAN EUROPEAN 100 CV, 74 KW 4CIL. SC26 M BASTIDORES: SC26-2100001-SC26-2102389 1991
HONDA ST 1100 PAN EUROPEAN 100 CV, 74 KW 4CIL. SC26 N BASTIDORES: SC26-2200001-SC26-2201773 1992
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26 P BASTIDORES: SC26-2300001-- 1993
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26 R BASTIDORES: SC26-2400001-- 1994
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26 S BASTIDORES: SC26-2500231-SC26-2501387 1995
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26D T BASTIDORES: JH2 SC26D-TM000001-JH2 SC26D-TM000464 1996
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26D V BASTIDORES: JH2 SC26D-VM100001-JH2 SC26D-VM100317 1997
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26D W BASTIDORES: JH2 SC26D-WM200001-- 1998
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26D X BASTIDORES: JH2 SC26D-XM300001-- 1999
HONDA ST 1100 PAN EUROPEAN 98 CV, 72 KW 4CIL. SC26D Y BASTIDORES: JH2 SC26D-YM400001-- 2000-2001
KYMCO VENOX 250 27 CV, 20 KW 2CIL. R20010 BASTIDORES: RFBR20010-- 2002-2004
KYMCO VENOX 250 27 CV, 20 KW 2CIL. R20011 BASTIDORES: RFBR20011-- 2004-2006
KYMCO VENOX 250 I 29,7 CV, 21,8 KW 2CIL. R20012 BASTIDORES: RFBR20012-- 2007-2013