EBC MX brake disc for Offroad/Enduro and ATV. MADE IN THE UK.
The aim of development is to improve braking performance compared to the original brake disc. EBC uses low carbon HPSR steel, which has an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick zinc coating, which wears away in the contact area of the brake pads as soon as the brakes are applied. Only in this area a slight rust with a longer service life can form.
The brake discs are drilled in a birdcage pattern to achieve as few holes as possible while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the performance of the brakes in the wet and the less wear.
- Rigid brake disc.
- Made of carbon steel with heat treatment.
- Braking surface drilled with an optimized hole pattern.
- Radially ground.
- Zinc plated to protect it from corrosion.
- EBC recommends EBC Organic TT brake pads or, for sporty riders, EBC sintered brake pads in R or MXS compound.
- Original design.
- The thickness of the brake disc may vary compared to the original part. OUTER DIAMETER: 230MM QUANTITY OF HOLES: 3 HOLE DIAMETER: 3 MM VERSION: RIGID