EBC motorcycle brake disc MX / ENDURO ATV 760.40.10
      • EBC motorcycle brake disc MX / ENDURO ATV 760.40.10
      • EBC motorcycle brake disc MX / ENDURO ATV 760.40.10

      EBC motorcycle brake disc MX / ENDURO ATV 760.40.10

      EBC
      Review (0)
      €106.24
      €196.79
      Save €90.56
      Tax included
      Quantity :
      Está disponible, lo enviaremos lo antes posible, lo recibirás en unos 15 días.
      EBC Prolite floating brake disc, full floater. MADE IN THE UK.

      The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses low carbon HPSR steel, which has an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected with a 3 micron thick layer of zinc, which is rubbed into the area of the contact patch of the brake pads when braking. Only in this area can a light oxide film form after a long period of time.

      The brake discs are drilled in the shape of a bird's wing to work with as few holes as possible and at the same time optimized cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better wet braking behavior and less wear.

      - Brake ring milled in forged HPSR steel with low carbon content.

      - Therefore, there is no distortion of the brake disc even under the highest load.

      - No glazing of the braking surface, so the coefficient of friction remains constant.

      - Braking surface drilled with an optimized hole pattern.

      - Galvanized to protect against corrosion.

      - Anodized aluminum hub.

      - Lower manufacturing tolerances.

      - EBC recommends EBC Double-H sintered brake pads for the best braking performance.

      - Independent design.
      OUTER DIAMETER: 290MM
      INSIDE DIAMETER: 121.2MM
      CIRCLE SIZE: 142 MM
      HOLES QUANTITY: 6
      HOLE DIAMETER: 10.5 MM
      thickness: 4mm
      VERSION: FLOATING


      APPLICATIONS OF THIS PRODUCT:
      According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
      SUZUKI DR 650 SE 44 CV, 32 KW 1CIL. SP46B T BASTIDORES: SP46B henceforth00500001-SP46B henceforth00501710 1996
      SUZUKI DR 650 SE 44 CV, 32 KW 1CIL. SP46B V BASTIDORES: SP46B henceforth00501711-SP46B henceforth00502735 1997
      SUZUKI DR 650 SE 44 CV, 32 KW 1CIL. SP46B W BASTIDORES: SP46B henceforth00502736-SP46B henceforth00503488 1998
      SUZUKI DR 650 SE 44 CV, 32 KW 1CIL. SP46B X BASTIDORES: SP46B henceforth00503489-SP46B henceforth00503800 1999
      SUZUKI DR 650 SE 44 CV, 32 KW 1CIL. SP46B Y BASTIDORES: SP46B henceforth00503801-- 2000
      SUZUKI DR 650 SEU 34 CV, 25 KW 1CIL. SP46B T BASTIDORES: SP46B henceforth00500001-SP46B henceforth00501710 1996
      SUZUKI DR 650 SEU 34 CV, 25 KW 1CIL. SP46B V BASTIDORES: SP46B henceforth00501711-SP46B henceforth00502735 1997
      SUZUKI DR 650 SEU 34 CV, 25 KW 1CIL. SP46B W BASTIDORES: SP46B henceforth00502736-SP46B henceforth00503488 1998
      SUZUKI DR 650 SEU 34 CV, 25 KW 1CIL. SP46B X BASTIDORES: SP46B henceforth00503489-SP46B henceforth00503800 1999
      SUZUKI DR 650 SEU 34 CV, 25 KW 1CIL. SP46B Y BASTIDORES: SP46B henceforth00503801-- 2000
      EBC
      760.40.10
      10 Items

      Data sheet

      EXTERNAL DIAMETER
      290 MM
      CIRCLE MEASUREMENT
      142 MM
      HOLE DIAMETER
      10.5MM
      INSIDE DIAMETER
      142 MM
      VERSION
      FLOATING
      QUANTITY OF HOLES
      6
      THICKNESS
      4 MM

      No customer reviews for the moment.

      Write your review
      EBC motorcycle brake disc MX / ENDURO ATV 760.40.10
      other products in the same category:
      EBC motorcycle brake disc MX / ENDURO ATV 760.40.10

      EBC motorcycle brake disc MX / ENDURO ATV 760.40.10

      €106.24
      €196.79
      Save €90.56
      Tax included