Free shipping to every country in the world! (Conditions applied)
EBC motorcycle brake disc MX / ENDURO ATV 760.38.71
€67.15
€80.55
Save 16.63%Tax included
EBC MX brake disc for offroad motorcycles. MADE IN UK.
The aim of the development is to improve the braking performance compared to the original brake disc. EBC uses low carbon HPSR steel with an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick layer of zinc, which wears off in the area of the contact patch of the brake pads during braking. Only in this area can rust form more easily during extended life.
The brake discs are drilled in Vogelschwingendesign to get along with as few holes as possible while optimizing the cleaning of the brake disc with rainwater and brake dust. The fewer holes installed, the better wet braking and less wear.
- Hard disk.
- Made of carbon steel with heat treatment.
- perforated brake surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty riders EBC sintered brake pads in R or MXS mix.
- Independent design.
- The thickness of the brake disc may vary compared to the original part.
OUTER DIAMETER: 250MM
INSIDE DIAMETER: 130.2MM
CIRCLE SIZE: 146 MM
HOLES QUANTITY: 9
HOLE DIAMETER: 10.5 MM
THICKNESS: 3.5MM
VERSION: RIGID
APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
KAWASAKI KLR 600 A 42/27 CV, 31/20 KW 1CIL. KL600A 1 BASTIDORES: KL600A henceforth00001-- 1984
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 1 BASTIDORES: KL600B henceforth00001-KL600B henceforth11000 1985
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 2 BASTIDORES: KL600B henceforth11001-KL600B henceforth18500 1986-1987
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 4 BASTIDORES: KL600B henceforth18501-KL600B henceforth20000 1988
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 5 BASTIDORES: KL600B henceforth20001-KL600B henceforth22800 1989
The aim of the development is to improve the braking performance compared to the original brake disc. EBC uses low carbon HPSR steel with an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick layer of zinc, which wears off in the area of the contact patch of the brake pads during braking. Only in this area can rust form more easily during extended life.
The brake discs are drilled in Vogelschwingendesign to get along with as few holes as possible while optimizing the cleaning of the brake disc with rainwater and brake dust. The fewer holes installed, the better wet braking and less wear.
- Hard disk.
- Made of carbon steel with heat treatment.
- perforated brake surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty riders EBC sintered brake pads in R or MXS mix.
- Independent design.
- The thickness of the brake disc may vary compared to the original part.
OUTER DIAMETER: 250MM
INSIDE DIAMETER: 130.2MM
CIRCLE SIZE: 146 MM
HOLES QUANTITY: 9
HOLE DIAMETER: 10.5 MM
THICKNESS: 3.5MM
VERSION: RIGID
APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
KAWASAKI KLR 600 A 42/27 CV, 31/20 KW 1CIL. KL600A 1 BASTIDORES: KL600A henceforth00001-- 1984
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 1 BASTIDORES: KL600B henceforth00001-KL600B henceforth11000 1985
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 2 BASTIDORES: KL600B henceforth11001-KL600B henceforth18500 1986-1987
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 4 BASTIDORES: KL600B henceforth18501-KL600B henceforth20000 1988
KAWASAKI KLR 600 B 44/27 CV, 32/20 KW 1CIL. KL600B 5 BASTIDORES: KL600B henceforth20001-KL600B henceforth22800 1989
760.38.71
10 Items
Data sheet
- INSIDE DIAMETER
- 146MM
- VERSION
- RIGID
- QUANTITY OF HOLES
- 9
- EXTERNAL DIAMETER
- 250 MM
- CIRCLE MEASUREMENT
- 146MM
- HOLE DIAMETER
- 10.5MM
- THICKNESS
- 3.5 MM
No customer reviews for the moment.
other products in the same category:
EBC motorcycle brake disc MX / ENDURO ATV 760.38.71
€67.15
€80.55
Save 16.63%Tax included
