SEALS AND DUST GUARDS

motorcycle seals

The function of the fork seals is extremely important to maintain proper motorcycle suspension. Such is the importance of this small part that, if it breaks down, it could cause major damage to the entire motorcycle. Do you want to know what a motorcycle seal is? You are in the right place!

It is a small circular piece that is located at the ends of the suspension system and its function is to keep the hydraulic oil inside the forks. When it wears out, it can lead to believe that the entire fork apparatus has been damaged, as it allows fluid to escape and causes concern.

It is necessary that you replace from time to time the seals of your motorcycle and that you take advantage, at the same time, to do the routine oil change, either by yourself or with the help of your mechanic. Remember that not only the integrity of your motorcycle''s system depends on this, but also your personal safety on the road.

The good news is that replacing them is not that difficult, although we always recommend the assistance of a professional for the installation of new parts on your bike, so that everything looks as good as possible.

How does a motorcycle seal work?

These parts are located at the ends of the fork suspension system and keep hydraulic oil inside the mechanism. This causes that, when there are cracks, breaks or wear of the seals, hydraulic fluid is lost.

That is why part of the maintenance of the fork is the oil change and the seals of the motorcycle. You can find them in any type of fork system, both seals for chopper motorcycle forks and seals for telescopic motorcycles or sports motorcycles.

Motorcycle seals: how often do you have to renew them?

Mechanical experts suggest changing the seals every 48,000 km, although you may have to change them much sooner. The best thing to do is to check your vehicle from time to time and if you see any signs that the seals are deteriorating, whether they are fluid leaks outside the fork or a decrease in the quality of the suspension, take it to a mechanic. or that you yourself take care of checking the fork.

There are at least two options in case of damage: that the seals have been damaged or that it is necessary to change the oil. In this sense, We do not recommend that you change the seals first, but that you previously carry out an oil change, so that you can check the integrity of the entire mechanism before taking any further action. Be that as it may, changing motorcycle seals is easier to do than other repairs.

How to change the fork seals on your motorcycle?

To change the seals we recommend that you have the new parts beforehand, since the process of removing the old ones can damage them and you will not be able to use them again. Finding the original seals is the most suitable option for your motorcycle, but there are standardized brands that you could also use.

1. Raise the front of your bikeYou can use a hydraulic jack to make this job easier. You will keep it fixed in the right place and prevent it from being damaged, scratched or dropped.

two. remove the fork, loosen the plug and open the upper part of it. You must remember the order in which you remove each piece, so that you reassemble them in the same way they were before and the mechanism is not damaged.

3. At this point you can perform oil change. Always remember to use the one recommended by the manufacturer of your motorcycle.

Four. Remove the clip that holds the retainer in place and then remove the part you want to change.

5. Put the new seal.

6. Reassemble the fork mechanism and install the part back on your bike.

motorcycle seal prices

On motorcycle We have a huge variety of prices, depending on the brand and caliber of motorcycle seals you want. All Balls brand seals (the cheapest) have a cost of between €9 and €15, but there are other brands that cost a little more, such as the Tourmax brand that can reach up to €20. The Centauro brand, on the other hand, tends to up to €30.

Select the one that best suits your needs!

What brands of motorcycle seals do we have at Mototic?

Next, we highlight the main brands of motorcycle seals that we have:

- ALL BALLS

Bearings and seals for motorcycle ALL BALLS They are considered in many countries as one of the best quality-price brands on the market. They have a longer shelf life than other budget brands and offer a wide variety of sizes and prices.

- TOURMAX

The brand TOURMAX They are known for their durability and quality, and with a variety of prices and sizes, they are ideal for both commercial and sport bikes.

- SHOWA

The brand SHOWA is also widely recognized, as well as the quality of its seals and bearings. It is a manufacturer with high quality standards that offers durability and resistance to all terrains.

- TECHNIUM

TECHNIUM With its distinctive blue color, it offers durability, quality and resistance to its users. It allows you to ride longer and maintain the stability of your motorcycle, as well as better protecting the oil from contamination.

Motorcycle seals at the best price

If you want to buy motorcycle seals at better prices, count on our services at Mototic. You will be able to acquire the best commercial brands in the world with quality equivalent to the original seals of your motorcycle.

Don''t think about it anymore, choose the motorcycle seals at the best price online, and enjoy your motorcycle like the first day!