Cures at room temperature by contact with the moisture film present on all surfaces and moisture in the air
Especially suitable for bonding and sealing materials with different rates of thermal expansion
Z. For example, metals, glass, ceramics, wood, textiles, leather, elastomers and thermosetting plastics with and between them.
Begins to cure after about 15 minutes (recognizable by a "skin formation")
Depending on the application, a full cure time of 24 hours to several days should be expected.
After full cure, good chemical resistance, eg, to water, weak acids and alkalis, fuels and lubricants, inert and combustible gases, oxygen, hydraulic fluids, etc.
Wide application temperature range, from -70 °C to +200 °C with continuous load.
It is suitable for gluing and sealing narrow gaps, as well as for filling joints and large gaps.
Silicone rubber adhesive has non-stick properties
Lacquers, paints and other media do not adhere to cured omniVISC surfaces
It has very good electrical insulation properties
Resistant to abrasion, moisture, weather and chemicals
Suitable as a protective coating
Colorless, transparent and with good wetting and adherence properties thanks to its fluidity
Application Examples:
Adhesion and sealing of glass with metals and plastics in vehicle construction, architecture and appliance engineering.
Seal or secure threads when easy release is desired
Fixing of aluminum and company signs to rough surfaces of other materials instead of the screws or rivets used up to now
Bonding of all kinds of fabrics with plastics and metals in the automotive and household appliance industries
Union of thermosetting plastics in the construction of relays and switches with metal parts, especially when they are exposed to temperature stresses
Filling and sealing of joints in cable passages, tubes, devices, switches, lighting fixtures, especially in explosion-protected rooms
For the abrasion-resistant and non-stick coating of containers, bunkers and silos in chemical equipment construction
Sealing of all types of inspection windows in front panels of instruments, heaters, gas appliances, water meters and caravans