Free shipping to every country in the world! (Check conditions)
JMP Lithium battery charge status transmitter VERSION 2 706.05.59
€33.56
€36.00
Save 6.76%Tax included
JMP Skan Monitor 2 Lithium
Battery control with your smartphone:
With the JMP Skan Monitor 2 and the new free app for Apple or Android "JMP BatteryMonitor II", you can check the state of charge of your battery quickly and easily.
Only when the battery has a positive and constant state of charge is its full capacity and usefulness guaranteed.
The positive state of charge also prevents possible premature damage or battery failure.
Thanks to continuous recording, the battery charge status is recorded during journeys and can also be called up later.
The data file can be emailed from the smartphone and viewed in Excel.
This way you can quickly see where the charging voltage has dropped or was too high.
A faulty regulator can also be quickly detected.
In addition, starting (starter, cable connections, etc.) and charging (alternator, cables, etc.) processes can be accurately checked with the new app.
This saves lengthy troubleshooting should one occur.
In case of low battery or other problems, a notification can warn the driver, depending on the settings in the app options.
After simply connecting it to the fork-eyed battery and downloading the new Android or Apple app, the current voltage value can be retrieved.
Keep in mind:
The transmitter can be used for 12 V batteries and is only suitable for lithium batteries.
The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II".
Please download the free app from Apple App Store or Google Play Store under JMP Battery Monitor II.
The connection is made via Bluetooth. (Only from Bluetooth 4.0; for example, from iPhone 4s, iPad3 or iPod Touch 5).
The range is approximately 10 meters.
Characteristic:
The JMP Skan Monitor 2 is ideal for detecting overvoltage > 14.9V from the alternator, for example, before battery damage occurs.
If the voltage falls below the minimum level, it warns that the battery must be recharged soon.
Simple fixing to the battery by fork-shaped eyelets.
Power consumption is only about 2 mA.
There is no damage to the transmitter or battery if the polarity is reversed.
Download the free app from the Apple App Store or Google Play Store under the name of JMP Battery Monitor II.
Voltage recording even while driving, the result can be sent by email (the file can be viewed in Excel).
Battery control with your smartphone:
With the JMP Skan Monitor 2 and the new free app for Apple or Android "JMP BatteryMonitor II", you can check the state of charge of your battery quickly and easily.
Only when the battery has a positive and constant state of charge is its full capacity and usefulness guaranteed.
The positive state of charge also prevents possible premature damage or battery failure.
Thanks to continuous recording, the battery charge status is recorded during journeys and can also be called up later.
The data file can be emailed from the smartphone and viewed in Excel.
This way you can quickly see where the charging voltage has dropped or was too high.
A faulty regulator can also be quickly detected.
In addition, starting (starter, cable connections, etc.) and charging (alternator, cables, etc.) processes can be accurately checked with the new app.
This saves lengthy troubleshooting should one occur.
In case of low battery or other problems, a notification can warn the driver, depending on the settings in the app options.
After simply connecting it to the fork-eyed battery and downloading the new Android or Apple app, the current voltage value can be retrieved.
Keep in mind:
The transmitter can be used for 12 V batteries and is only suitable for lithium batteries.
The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II".
Please download the free app from Apple App Store or Google Play Store under JMP Battery Monitor II.
The connection is made via Bluetooth. (Only from Bluetooth 4.0; for example, from iPhone 4s, iPad3 or iPod Touch 5).
The range is approximately 10 meters.
Characteristic:
The JMP Skan Monitor 2 is ideal for detecting overvoltage > 14.9V from the alternator, for example, before battery damage occurs.
If the voltage falls below the minimum level, it warns that the battery must be recharged soon.
Simple fixing to the battery by fork-shaped eyelets.
Power consumption is only about 2 mA.
There is no damage to the transmitter or battery if the polarity is reversed.
Download the free app from the Apple App Store or Google Play Store under the name of JMP Battery Monitor II.
Voltage recording even while driving, the result can be sent by email (the file can be viewed in Excel).
706.05.59
10 Items
No customer reviews for the moment.
other products in the same category:
JMP Lithium battery charge status transmitter VERSION 2 706.05.59
€33.56
€36.00
Save 6.76%Tax included
