JMP Lead/gel battery charge status transmitter VERSION 2 706.02.73

JMP Skan Monitor 2



Battery monitoring with smartphone

"Not suitable for lithium batteries."

With the JMP Skan Monitor 2 and the new and free application for Apple or Android "JMP BatteryMonitor II" you can,

the state of charge of your battery quickly and easily. Just with a constant,

The positive state of charge is the one that guarantees the full capacity and usefulness of the battery.

The positive state of charge also prevents possible premature damage or battery failure.

Thanks to continuous recording, the battery charge status is recorded during journeys and can also be called up later.

The data file can be emailed from the smartphone and viewed in Excel.

This way you can quickly see where the charging voltage has dropped or was too high. A faulty regulator can also be quickly detected.

In addition, starting (starter, cable connections, etc.) and charging (alternator, cables, etc.) processes can be accurately checked with the new app.

This saves lengthy troubleshooting should one occur. In case of low battery or other problems, a notification can alert the driver, depending on the settings in the app options.

After a simple connection to the battery through fork eyes and downloading the new application for Android or Apple, the current voltage value can be consulted.

The transmitter can be used for 12 V batteries.

The range is approximately 10 meters.

The connection is made via Bluetooth. (Only from Bluetooth 4.0; for example, from iPhone 4s, iPad3 or iPod Touch 5).

The JMP Skan Monitor 2 is ideal for detecting overvoltages > 14.9 V in the alternator before the battery is damaged.

Note: The new JMP Skan Monitor 2 requires the new app "JMP BatteryMonitor II"!



If the voltage falls below the minimum level, it warns that the battery must be recharged soon.

- Easy fixing to the battery by fork-shaped eyelets

- Power consumption of only approximately 2 mA

- No damage to transmitter or battery if polarity is reversed

- Download the free app from the Apple App Store or Google Play Store under the name of JMP Battery Monitor II.

- Recording of the voltage even while driving. The result can be sent by email. The file can be viewed in Excel.