KUKKO® spreading device with quick pressure spindle, 17 series
For removal of ball bearings, roller bearings, inner rings and other flush sitting parts
An indispensable tool for automotive, agricultural and industrial mechanic removal.
Particularly practical because the spreader jaws are clamped quickly and centrally with a quick pressure spindle
Sharp edges make the support parts flush with stripping where hooks are inapplicable
Large contact areas protect the deducted part
The sharp wedge-shaped blades are pressed behind the parts to be disassembled and sat between the bearing and the seat
To remove the puller series loop bolt must be 18 (only applicable in combination with this - see accessories) is screwed into the separating device
Caution: Detail image for promotional use only! Observe the safety instructions!
Ø Gap: 5 -60 mm (13/64 / 2 3/8 ")
standoff bolt distance: 60mm (2 3/8")
Diameter: M10
Weight: 0.95kg
TYPE: EXTERNAL EXTRACTOR
INTENDED USE: BEARINGS / BEARINGS
DRIVE: EXTERNAL HEXAGON
646.00.05
10 Items