CONDOR Kit 8 sockets for threaded taps 637.00.73

Tap holding set, 8 pieces

for taps with external square drive 2.7 - 8.4 mm (approx. corresponds to taps M1.5 - M12 or 1/16 - 1/2 inch NF/NC)

1/4 + 3/8 inch drive

for handling with a ratchet, sliding handle or other driving tool

especially for use in deep shafts when an extension is used

Strong magnet to hold the tap

Scope of supply:

1 tap holder with square profile 2.7 - 3.0 - 3.8 - 4.9 - 6.3 - 7.0 - 7.4 - 8.4 mm on plug-in strip