Free shipping to every country in the world! (Check conditions)
Pitch control and laser aiming tool 617.00.64
€301.86
Tax included
laser point and camber check tool
With this tool, toe and camber geometry can be taken prior to a repair
After the repair, these values can be recovered without the need for wheel alignment to be done.
Laser support plates are designed for 4 and 5 hole spacings
They are attached to the wheel studs
The projected by the laser point is fixed by means of an adhesive tape and a fixed point painted on the wall or on the floor
After replacing the defective parts, the laser points are realigned with the previously established fixed points
Therefore, the values of the voherigen geometry are restored
For example, when working on: shock absorbers, supporting joints, arms control, braces, etc.
With this tool, toe and camber geometry can be taken prior to a repair
After the repair, these values can be recovered without the need for wheel alignment to be done.
Laser support plates are designed for 4 and 5 hole spacings
They are attached to the wheel studs
The projected by the laser point is fixed by means of an adhesive tape and a fixed point painted on the wall or on the floor
After replacing the defective parts, the laser points are realigned with the previously established fixed points
Therefore, the values of the voherigen geometry are restored
For example, when working on: shock absorbers, supporting joints, arms control, braces, etc.
617.00.64
10 Items
No customer reviews for the moment.
other products in the same category:
Pitch control and laser aiming tool 617.00.64
€301.86
Tax included
