Motul brand oil is considered one of the best on the market as it is of the highest quality, thus generating less friction and reducing the chances of residues damaging internal parts and bearings. Before buying any Motul oil, first find out which of them is the best for you to use, since it is not the same to drive on the road than on competition terrain, for example. We solve your doubts!
Motul 5000 4T 10W-30
MOTUL 5000 4T 10W-30 is a multigrade 4-stroke engine oil based on HC-TECH® for motorcycles where semi-synthetic engine oils must be used according to the manufacturer's recommendation. Oil specially developed with additives adapted for the transmission. Meets the requirements of motorcycle manufacturers, eg HONDA, YAMAHA, who prescribe SAE 10W-30 viscosity. Suitable for motorcycles in normal daily use.
SPECIFICATIONS/STANDARDS:
STANDARDS: API SL/SJ/SH/SG
APPROVALS: JASO MA2 No. M033MOT152
The JASO (Japan Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils with JASO T 903. The MA, MA1 and MA2 gradations make it easy to select motorcycle engine oils have been specially developed for wet clutches. JASO MA2 stands for the highest friction values and therefore optimum clutch compatibility when changing gears, during the acceleration phase and also at constantly high speeds.
Advantage:
- It can be used throughout the year.
- The optimized content of sulfur and phosphorus guarantees the long-term operation of the catalysts.
- High protection against wear and corrosion.
- Tendency to low oil consumption.
- The easy-to-handle viscosity allows fast lubrication even in the starting phase, reduces critical wear at cold start and is ideal for hydraulic tappets.
RECOMMENDATIONS AND NOTES:
Change the interval according to the vehicle manufacturer's specifications or adjusted according to the operating conditions. Before use, be sure to observe the manufacturer's service documents and recommendations.
Properties:
Color (visual) brown
Viscosity SAE J 300 10W-30
Density at 20°C ASTM D 1298 0.868
Viscosity at 100°C ASTM D 445 11.2 mm²/s
Viscosity at 40°C ASTM D 445 73.1 mm²/s
Viscosity index ASTM D 2270 145
Pour point ASTM D 97 -33°C
Flash point ASTM D 92 228°C
TBN ASTM D 2896 7 mg KOH/g APPLICATION: ENGINE VISCOSITY: 10W30 TYPE: 4-STROKE QUALITY: SYNTHETIC JASO APPROVALS: MA2 API SPECIFICATION: SG CONTENT: 1 LITERS