Motul brand oil is considered one of the best on the market as it is of the highest quality, thus generating less friction and reducing the chances of residues damaging internal parts and bearings. Before buying any Motul oil, first find out which of them is the best for you to use, since it is not the same to drive on the road than on competition terrain, for example. We solve your doubts!
Motul ATV/UTV Expert 4T 10W-40
MOTUL ATV-UTV EXPERT 4T 10W40 is a 4-stroke multigrade oil based on MOTUL Technosynthesis?, specially developed for sports or professional use in modern all-terrain vehicles (ATVs), utility vehicles (UTVs). For high-performance models with 4-stroke engines with or without integrated transmission, wet or dry clutch, as well as for engines that meet Euro-2 or Euro-3 requirements.
SPECIFICATIONS/STANDARDS:
STANDARDS: API SM/SL/SJ
PERFORMANCE: JASO MA
The JASO (Japan Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils with JASO T 903. The MA, MA1 and MA2 gradations make it easy to select the motorcycle engine oils to be used. have been specially developed for wet clutches. JASO MA2 stands for the highest friction values and therefore optimum clutch compatibility when changing gears, during the acceleration phase and also at consistently high speeds.
Advantage:
- The optimized content of sulfur and phosphorus guarantees the long-term operation of the catalysts.
- Prevents corrosion and contamination in the engine.
- For modern engine technology with wet clutch and gear lubrication in the same oil bath. The clutch does not bind or slip.
- Excellent antioxidant, anticorrosive and antifoam properties
- Even in low gears and under extremely high loads, ATV-UTV EXPERT 4T guarantees a stable lubricating film and protects against wear.
- Special EP additives reliably protect the gearbox against wear, facilitate the starting process even in gear, as well as the shifting process.
- Low evaporation loss reduces oil consumption.
RECOMMENDATIONS AND NOTES:
Change the interval according to the vehicle manufacturer's specifications or adjusted according to the operating conditions. Before use, always observe the service documents and the manufacturer's recommendations!
Properties:
Color (visual) brown
Viscosity SAE J 300 10W-40
Density at 20°C ASTM D 1298 0.859
Viscosity at 100°C ASTM D 445 13.6 mm²/s
Viscosity at 40°C ASTM D 445 89.5 mm²/s
Viscosity index ASTM D 2270 156
Pour point ASTM D 97 -32°C
Flash point ASTM D 92 225°C
TBN ASTM D 2896 7.6 mg KOH/g APPLICATION: ENGINE VISCOSITY: 10W40 TYPE: 4-STROKE QUALITY: SYNTHETIC JASO APPROVALS: MA API SPECIFICATION: SJ CONTENT: 1 LITERS